An ‘Exercise Pill’ Just Cleared Its First Human Test



Scientists might be inching closer to a breakthrough that some of us lazy bums would very much appreciate: a pill that can safely provide the same healthy benefits of exercise.

On Tuesday, the pharmaceutical company Enveda announced the results of a Phase I trial of its experimental drug ENV-308, which is designed to mimic a hormone released while exercising. In healthy volunteers, the trial showed that ENV-308 appears to be safe and well-tolerated, and Enveda is hoping that the drug can help people maintain their weight loss and hold onto their muscle mass, all without causing the well-known gastrointestinal side effects seen with popular GLP-1 drugs like semaglutide.

“ENV-308 is our attempt to put the chemistry of exercise into a daily tablet, and to offer a sustainable and convenient solution that synergizes with people’s daily habits and supports them on the path to long-term health,” said Viswa Colluru, founder and CEO of Enveda, in a company statement.

Exercise in a pill?

ENV-308 mimics a recently discovered molecule called N-lactoyl-phenylalanine, or Lac-Phe for short. Our bodies seem to produce Lac-Phe in higher amounts during intense exercise as well as after eating. Studies have indicated that it helps suppress appetite, and obese mice treated with Lac-Phe have been shown to lose weight as a result. That’s made scientists curious about its potential as an obesity drug.

Naturally occurring Lac-Phe only lasts for a short time in the body, however. ENV-308 is intended to stick around long enough to be taken as a once-a-day pill. According to the company, it was discovered via Enveda’s proprietary AI model PRISM.

In this first human trial of ENV-308, 88 healthy adults were given varying doses of the drug. Phase I trials are mainly intended to gauge the safety of an experimental drug or vaccine, and ENV-308 seemed to pass this initial test with flying colors. No serious adverse events were reported among the volunteers, nor did anyone stop taking the drug. Notably, it also had an “exceptional gastrointestinal safety profile,” the company stated.

The trial may have additionally shown some early signs of Lac-Phe working as hoped. People with obesity are known to often have elevated levels of leptin, a hormone that helps signal fullness while eating. It is hypothesized that this is because people’s bodies stop responding to leptin as well as they should.

In studies of obese animals, ENV-308 has rapidly lowered leptin levels, suggesting it can reverse this dysfunctional response. During the trial, researchers found lower circulating levels of leptin in the human volunteers, as well.

The future of ENV-308

This research is in its early days, and should the company’s development of ENV-308 continue to prove successful, it can’t fully replace the need for exercise. Even assuming Lac-Phe is as helpful as we think it might be, it’s only one of many positive changes that exercise produces.

Still, finding new ways to treat obesity or other metabolic conditions remains important. Some people are unable to tolerate the GI side effects common to GLP-1s, while others might prefer the convenience of a daily pill over a weekly injection (though some GLP-1s are also now available as a pill). Muscle loss isn’t a major concern for most GLP-1 users, but some people are more vulnerable to it, like older adults, and they could benefit from an obesity treatment that can better preserve muscle.

Enveda plans to continue testing ENV-308 in a larger Phase II trial for weight loss maintenance, and it’s evaluating the drug for other conditions that might benefit from its exercise-like effects, such as migraines and inflammatory bowel disease.

Ideally, ENV-308 will show that it is possible to safely mimic or even amplify at least some of the best aspects of exercise. I’m not giving up my running routine anytime soon, mind you, but I’ll definitely be hoping that ENV-308 is only the first of many drugs that can do so.

Why Hiring a CAD Modeling Company Is a Smart Choice for New Product Development & Design


So you’re on the brink of new product development. You have an idea sketched showing the product’s form factor, specifications listed, functions and features outlined, the lot. Would you say that’s enough to launch a full-blown development, or do you think some things are still missing? Well, frankly speaking, what you have here is a mere concept. And before you can transform it into an actual product, it needs to go through several big steps, like CAD modeling, prototype design services, testing, and, of course, manufacturing.

For now at least, let’s focus on the CAD modeling part, or more specifically, why hiring a CAD modeling company is one thing you should seriously consider for an NPD (New Product Development) project. We’ll first talk about the various ways it can improve the project before moving on to a likely alternative: Cad Crowd’s Managed Services and how it might better suit your needs.


🚀 Table of contents


CAD modeling company – a sensible choice

Unless you’re well-trained in CAD software, there’s little point in NOT hiring a design firm for the NPD. Let’s do a simple breakdown of what a CAD company can do and how it may lead to a successful project.

RELATED: Product Development Considerations that Can Make or Break New Product Ideas Before Launch

They already have access to the right design tools

Professional CAD modeling software like Autodesk Inventor, SOLIDWORKS, PTC Creo, and Siemens NX is not cheap and is becoming more expensive each year. They were already expensive back then, but at least you could buy them as a one-time purchase. Many of them have now moved to subscription-based licensing, which can be brutally expensive for some. We’re sure there are free and open-source options, but they’re generally not as well-supported as their premium counterparts. Imagine spending hundreds (if not thousands) of dollars on a software package, only to have to learn to do the modeling for months afterward. Instead of spending money on the tools alone, it just makes more sense to hire a design company that already has access to the software. The budget allocated to the license is likely more than enough to cover the company’s services.

It might not be a problem if you’re running a well-funded brand and not entirely a newcomer in the market. But then again, if you have the money to begin with, you’re likely to have an in-house CAD team. A lot of design companies work with startups or small businesses, the kind of clients who have product ideas but minimal resources to develop them further. This is not to say that CAD modeling companies work only with small clients, though. Well-known brands often outsource product modeling to external parties from time to time. The point is that hiring a CAD modeling company relieves you from having to invest in software and computers in the first place, so you can spend the money on the more pressing tasks like product prototyping and testing later on.

Get things going right away

Say you have now hired a CAD modeling professional to further develop the concept into something a bit more fleshed out, perhaps a design that actually resembles a real product rather than sketches on a piece of paper. Everything seems in order. Probably the only thing that isn’t really on your side at this point is, as we all know too well, time. Developing a new product is always a race. You’ve done the market research, come up with a feasible idea, and brought in some experts, but there’s no telling if you’re the only person doing it. Some other people might be developing similar products, and they can be your direct competitors in the market. Coming close second to launching a product isn’t quite enough. You have to be the first to get to the market to gain as much competitive advantage as possible. You need to run the project efficiently and ensure the design process is carried out with minimal delay.

RELATED: How the Engineering Design Process Helps You Craft New Products for Consumer Goods Firms

new-product-design-for-efficient-product-commercialization

Hiring a CAD modeling company means you don’t have to deal with the design team personnel management day in and day out. Most companies have a project manager of some sort who serves as the main point of contact to bridge communication between the client and the CAD team. As far as the client is concerned (in this case, you), the company’s main task at this point is to churn out as many design iterations as possible based on the detailed specification you provided. The fact that you’re relieved from daily managerial operations (which you otherwise must do with an in-house team) can simplify the project a great deal on your part. In other words, it gets the NPD project going right away.

In the hands of professional modelers, product concepts and rough sketches are transformed into a 3D model. It might not look like much at first, but the model itself contains detailed information about dimensions, materials, parts and components, assembly, and the product’s inner workings. If it is an electronic product, the team might also use PCB design software to build the layout and run multiple functionality tests. Advanced modeling software enables virtual simulation, so the tests are almost entirely conducted on a computer as well. In the event of errors or things not working (during the simulation), the team can make changes to the design quickly.

During the latter stage of the design process, the 3D model is rendered into a photorealistic visualization to give you an idea of how the product will look in the real world. But rendering with lifelike materials and textures isn’t just a visual treatment for the eyes. It’s a crucial step before prototyping to provide fabricators with a clear objective. They need to know what the end product is supposed to look like, so they can build it accordingly.

RELATED: A Guide to Concept Design with Product Design & Engineering Companies

From basic 3D modeling to renderings to prototyping, the tasks are done in a sequential run. CAD modeling companies typically cover all three (though there’s no guarantee they will handle everything with equal expertise). You can hire a separate person to build the prototype if you want, but the process won’t be as streamlined. There are just not enough good reasons to deal with two separate companies if one can do everything just as effectively. What if the prototype doesn’t turn out as good as expected, and you need to modify the 3D model? Rather than having two separate teams go back and forth on the file transfer and revisions, it makes more sense from a management standpoint to keep everything under one roof.

Ideally, throughout this whole design and prototyping process, you’ll be involved every step of the way. It’s your project after all, which gives you the right to have the final say about the outcome. No company should move forward with the design without your approval. For instance, once the initial 3D modeling is complete, the company must contact you for feedback before moving on to 3D rendering services. Only when you give the green light can they proceed to the next step. This is to prevent making changes when the project has gone too far, because any revision then will be much more challenging, both on the technical and budgetary levels.

Fixing mistakes before they get expensive

Simulation and photorealistic visualization are two of the most useful aspects of CAD modeling. Picture this scenario: you’ve spent thousands of dollars on a partnership with a factory to build a mixed-cavity steel mold and run a low-volume production run of the design, only to find out that the parts won’t fit perfectly with each other. And it’s not like the problem arises from an inefficient manufacturing method or a poor material choice. It happens because there’s a fraction of a millimeter misalignment between the parts. Believe it or not, this kind of mistake isn’t exactly uncommon in the manufacturing world.

RELATED: How Can Accurate 3D CAD Modeling Benefit to the Design Process of Your Firm

product-design-for-high-quality-commercial-product

Modern CAD modeling will not let that happen to begin with. CAD professionals don’t just build cool-looking geometry and render models into lifelike images for the fun of it. No 3D model (of a product design) is actually finished until they run through checks and virtual simulations. Mistakes on object dimensions and tolerance between parts rarely happen, if ever. Even if there are mistakes in the design process, the 3D model displayed on a computer screen makes them easy to spot.

For instance, a product consists of multiple parts assembled into a single unit; think of a music box, a door lock, or a mechanical scale. Although the parts are supposed to be put together to make the product, each of them is modeled as an individual object, so it’s easier to check if they fit. The dimensions and tolerances are checked and double-checked to ensure they all come together nicely.

But the most exciting stuff happens during the simulation run. Because the product has yet to be prototyped, let alone manufactured, the modelers rely on virtual simulations to assess how its materials, parts, components, and assembly withstand external factors. And simulations come in all sorts of varieties, such as:

  • FEA (Finite Element Analysis): an overview of how a product behaves when exposed to structural tests like vibrations and drops.
  • CFD (Computational Fluid Dynamics): an analysis of the movement of liquid, gas, and heat in and around the product.
  • MBD (Motion and Kinematics Simulation): a series of tests to understand how the interconnected parts (gears, linkages, etc.) interact with each other.

RELATED: How 3D Modeling is Beneficial in Product Manufacturing & New Product Development Services

There’s also process simulation that offers a closer look into how specific manufacturing methods build the product. It’s a comparison test to see if any particular process, such as metal casting, injection molding, or CNC machining, yields better results than another. For every simulation to produce usable data, the modeler must input accurate product specifications, including weight, material, thermal conductivity, elasticity, tensile strength, and more. Electronic products also have their own set of simulations, specifically for PCBs, to analyze factors such as frequency response, signal integrity, voltage drop, current, electromagnetic interference, and heat dissipation.

Modeling and simulations comprise an NPD stage known as “virtual prototyping.” The idea is to contain most of the iterative prototyping process within a virtual world, meaning that all errors and subsequent design revisions should happen as much as possible on a computer screen. It’s a massive money-saving exercise because, at this point, you haven’t purchased any raw materials. Whatever product you’re making, electrical or mechanical or a combination of the two, CAD affords you the opportunity to first fully optimize the design while it’s still a digital file. Everything you’ve achieved up to this point is to prepare for the next phase: physical prototyping.

New product development cost breakdown

Service Estimated Cost (USD)
Product concept design $500–$2,000
3D CAD modeling $300–$2,500
Prototype development $500–$10,000+
Engineering & DFM review $1,000–$5,000
Complete product design package $5,000–$50,000+

DFM (Design for Manufacturing)

Every good 3D modeling company worth its salt knows what DFM is and how to implement its principles in an NPD project. 3D modeling, while a specialized skill, isn’t the most difficult thing to learn. Many people can build digital models of all kinds of products. And now, with the proliferation of AI (Artificial Intelligence) tools, even high-schoolers may claim they know how to do the job. What separates professionals from amateurs is the design’s manufacturability. Professionals understand that the design will be mass-produced at some point, so they build it with DFM in mind.

RELATED: How Design for Manufacturability (DFM) Services Help with New Product Design at Your Startup

Just because CAD software offers the freedom to create any imaginable shape doesn’t mean you should go all the way and build intricate designs with awkward undercuts, internal corners, or pronounced asymmetrical texture on the surface. The design might be good as an industrial art showcase, but it is unnecessarily complex for mass production. It’s unique for the sake of being unique, and that mindset barely has any place in an NDP project.

Many popular products have retained their basic form factors for decades for this very reason; think of fountain pens, TV remote controls, backpacks, silverware, showerheads, and many others. Yes, there are some variations here and there, but the basic designs remain largely the same. You don’t want to send the design to a factory only to be told to revise it further because it’s too cost-prohibitive to manufacture, or perhaps even outright impossible. But DFM process isn’t just about manufacturability. It also has everything to do with keeping the production cost per unit as low as possible.

new-product-design-improves-product-development-success

Are Cad Crowd’s managed services better?

The short answer is: yes, in almost every respect. As impressive as a design company is, there will always be some limitations you might find inconvenient at best. Among the most concerning disadvantages is the possible lack of a cross-functional team. Mind you that not every company has the right specialist for every field of expertise you need. For instance, a CAD modeling company’s biggest strength lies in 3D visualization.

RELATED: Top Product Usability Factors for Good Product Design Services & New Prototypes 

They’ve made some excellent photorealistic models with great details and plenty of unique designs in the portfolio. If photorealism is the only thing you want, the company is indeed the right fit. But this isn’t enough for an NPD project. You also need virtual prototyping and simulations with clear data, to say the least. Can this company provide such services, too? Chances are they claim to also cover the tasks, but you know very well those services are not within their main area of expertise.

What if your product is an electronic device that requires PCB layout engineering and certifications? Or perhaps a medical device that needs to comply with even stricter regulations? Do you think a typical CAD modeling company can handle the workload and deliver good results? Slim chance.

A traditional “single” CAD modeling company remains a viable option only when they actually have a multidisciplinary team to do everything you ask for in-house. Such design companies do exist, but you’re talking about high-end firms with hundreds of thousands of dollars. You’re asking for turnkey services, yet turnkey services don’t come cheap. At the same time, without turnkey services that include virtual prototyping and simulations, as well as DFM, a modeling company becomes a bottleneck.

RELATED: 38 Top Tips for Outsourcing Physical Product Development with US Product Design Firms

Cad Crowd’s Managed Services are not like any typical CAD modeling company. Rather than forcing you to partner with a rigid team that masters only one thing yet is rubbish in all others, Cad Crowd offers you the flexibility to shift and scale the team on-demand, depending on what you need at any given stage of the product development. Keep in mind that the US-based freelancing platform is backed by an extensive network of NPD professionals from all over the world, with a broad range of expertise and experience levels, ready to provide their services regardless of complexity.

Once you’ve described your project, including the objectives and timeline, Cad Crowd assembles the best possible 3D design team with the right qualifications for your specific needs and budget. Among the strongest points of Managed Services are flexibility and scalability. There’s no one-size-fits-all approach to an NPD project.

  • Do you want to build an energy-efficient PCB layout? Cad Crowd summons an experienced electrical engineer to work on it.
  • In need of a new alloy to make a hardware enclosure? There’s always a structural engineer for you to hire from the platform.
  • What about testing and certifications? You’ll find no shortage of experts in those fields, too.
  • Does Cad Crowd have expert CGI artists who can create photorealistic visualizations of the product? Yes, it has plenty.
  • What if the project only needs some, not all, of those areas of expertise? Some or all of it is not an issue at all.
  • Wouldn’t that be an IP management nightmare? Cad Crowd also has it covered.

RELATED: Top 5 Prototyping Mistakes to Avoid in Product Development (And How to Fix Them)

Closing thought

Every product is unique, with its own set of design constraints and challenges. Cad Crowd believes everyone deserves their own elite, custom-assembled team of experts to help overcome any obstacle in an NPD project. Managed Services can help you eliminate traditional company bottlenecks and ensure your product is designed to perfection, inside and out.

How Cad Crowd can help

Bringing a new product to market takes thoughtful planning, expert design, and efficient engineering. Cad Crowd connects businesses with experienced product designers and engineering professionals who can assist with concept development, 3D CAD modeling, prototyping, Design for Manufacturing (DFM), and product optimization. Whether you’re developing a new consumer product or refining an existing design, our experts can help turn your ideas into market-ready products. Contact Cad Crowd today for a free quote.

author avatar

MacKenzie Brown is the founder and CEO of Cad Crowd. With over 18 years of experience in launching and scaling platforms specializing in CAD services, product design, manufacturing, hardware, and software development, MacKenzie is a recognized authority in the engineering industry. Under his leadership, Cad Crowd serves esteemed clients like NASA, JPL, the U.S. Navy, and Fortune 500 companies, empowering innovators with access to high-quality design and engineering talent.

Connect with me: LinkedIn ✦ X ✦ Cad Crowd

NBA 2K27 Preseason Breakdown Game Reveal


About this video

The NBA 2K27 Preseason Breakdown Game Reveal provides an in-depth overview of everything new this year. Get the full scoop on brand-new content coming to The City, MyCAREER, MyTEAM, and more, in addition to every update to NBA 2K’s core gameplay and features.

Gain an edge with up to 9 days of Early Access starting August 26. Pre-purchase NBA 2K27 Deluxe Edition or Ultra Edition to start your season early and set the tone on the court.

NBA 2K27

2K


☆☆☆☆☆
309


★★★★★


$69.99

NBA 2K27 Deluxe Edition

2K


☆☆☆☆☆
309


★★★★★


$99.99

NBA 2K27 Ultra Edition

2K


☆☆☆☆☆
310


★★★★★


$149.99

2026 SaaS security report: Closing the unmanaged trust gap


More than 27.6 billion SaaS security events reveal a growing challenge for IT teams.

SaaS environments now run on a web of trusted users, apps, shared files and automated workflows. As those connections multiply, so do the blind spots attackers can exploit.

Discover the SaaS security shifts that will be critical to improving visibility, reducing exposure and protecting trusted business connections in 2026.

In this report, you’ll learn:

  • Why guest accounts, OAuth integrations and external file sharing are expanding the SaaS attack surface
  • How attackers are using trusted accounts, infrastructure and workflows to hide inside normal business activity
  • Which defensive shifts can help IT teams improve identity visibility, reduce alert noise and respond faster

Difficulties of Selling Supplements on Amazon


Difficulties of Selling Supplements on Amazon
Envato.com

Selling supplements on Amazon looks simple from the outside.

Pick a product, source a manufacturer, list it, and let Amazon’s traffic do the rest. Thousands of home-based entrepreneurs have built real businesses exactly this way.

The category is genuinely massive. U.S. supplement industry sales grew 5.5% in 2025 to reach $72.9 billion, and most of that buying now happens online.

But once you’re actually in the category, a handful of problems show up fast. They don’t go away just because your product works. Here are the five that catch new supplement sellers off guard most often.

Extremely Saturated Categories

Supplements are one of the most crowded categories on Amazon, full stop.

The supplements category on Amazon alone now generates more than $8 billion annually in the U.S. Overall supplement industry sales grew more than 11% in the twelve months ending February 2026. That kind of growth pulls in new sellers constantly, and the competition at the top only keeps getting more crowded.

Walk into almost any subcategory, magnesium, iron, collagen, multivitamins, probiotics, and you’ll find dozens of nearly identical listings competing for the same handful of keywords. New sellers often assume a good formula is enough to stand out. It isn’t.

Branding, packaging, and search visibility now matter as much as what’s actually in the bottle, because shoppers rarely scroll past the first page.

This is where a lot of home-based supplement businesses stall before they even get going. Entering a broad category like “magnesium gummies” with no differentiation means competing directly against companies with seven-figure ad budgets. The sellers who actually break through tend to find a narrower angle: a specific ingredient form, a specific audience, a specific problem, rather than trying to out-market the category leaders head-on.

Margin Pressure

Even when a listing sells well, profit is far from guaranteed.

Supplement keywords carry some of the steepest pay-per-click costs on Amazon, since every competitor is bidding for the same limited pool of high-intent shoppers. Add in Amazon’s referral fees, FBA storage and fulfillment costs, and the price of third-party lab testing now required under Amazon’s updated supplement compliance rules, and the math gets tight quickly.

Price wars make this worse. When five brands sell a nearly identical product, undercutting on price is often the only lever new sellers know how to pull. That pressure compounds over time.

What starts as a healthy margin on paper can shrink to almost nothing once advertising spend, returns, and compliance costs are factored in.

The sellers who protect their margins treat advertising as a precision tool, not a blunt one: tracking ACoS closely, building organic ranking through genuine repeat customers, and resisting the urge to compete purely on price. It’s slower. But it’s the difference between a supplement business that survives its second year and one that doesn’t.

Health Fads

Supplements are unusually exposed to trend cycles, and social media has made those cycles faster and more volatile.

Vitamins and supplements are now the single largest health and beauty category on TikTok Shop, and that channel has been growing at more than 71% year over year. That’s a pace fast enough that a single viral moment can send demand for an obscure ingredient soaring almost overnight, only to collapse just as fast once the next trend takes over.

That volatility creates a real inventory problem. Order too much stock chasing a trending ingredient, and a brand can be sitting on unsellable inventory within a few months. Order too little, and it misses the window entirely.

Health fads also tend to invite a wave of low-quality copycat listings the moment something starts trending. That floods the category and drags down trust for everyone selling in that space, fad-chasers and legitimate brands alike.

The more durable approach, and the one reflected in where the broader industry is heading, is building around ingredients with a genuine, lasting evidence base rather than whatever is peaking on social media this month. Some family-owned supplement brands have leaned specifically into well-established, foundational nutrients like magnesium, iron, zinc, and vitamin D, rather than chasing whatever ingredient is trending, precisely because fad-driven demand is such an unstable foundation to build a business on.

Review Manipulation

Reviews carry enormous weight in supplement purchasing decisions, which is exactly why the category has become a magnet for review manipulation.

Industry estimates suggest that roughly 30% of top-selling supplement listings on Amazon have used fake or manipulated reviews at some point. The practice has drawn serious regulatory attention as a result.

The consequences are not hypothetical. In 2023, the FTC charged Bountiful Company, the maker of Nature’s Bounty and Sundown, with hijacking ratings and reviews on other product listings to inflate its own Amazon pages. The company paid $600,000 to settle the charges.

Amazon has responded with its own aggressive enforcement, now blocking over 250 million suspected fake reviews annually and pursuing legal action against review-selling networks directly.

For honest sellers who sell supplements on Amazon, this creates a frustrating bind. Competing against listings with artificially inflated ratings is discouraging, and the temptation to cut corners is real. But the risk has grown sharply: manipulated reviews can now trigger suppressed listings, withheld funds, and permanent account bans, on top of the legal exposure.

Building review volume the legitimate way, through genuine product quality and consistent customer follow-up, takes longer. But it’s the only version of review growth that doesn’t come with a ticking clock attached.

Consumer Skepticism

The final challenge is the hardest to fix with tactics alone: shoppers are getting warier of supplement marketing in general.

A 2025 industry survey on health and wellness consumers found that 55% of people who bought a wellness product because of social media marketing later felt it wasn’t worth the money. A third were openly skeptical of the efficacy claims behind what they’d purchased.

Interestingly, the same research points to what still works: 85% of consumers said they trust recommendations from medical professionals over influencer content, and shoppers are increasingly cross-checking ingredient claims before buying rather than taking a five-star rating at face value.

For supplement sellers, that shift is actually good news for anyone building honestly. Clear labeling, real third-party testing, and straightforward claims are becoming a genuine competitive advantage, not just a compliance checkbox.

The brands most likely to struggle going forward are the ones that built their entire strategy around hype rather than substance. That’s precisely the kind of marketing today’s more skeptical shopper has learned to see through.

The Bigger Picture

Selling supplements on Amazon still offers real opportunity for home-based entrepreneurs, but it rewards patience over speed.

The sellers who last tend to be the ones who treat saturation, margins, fads, reviews, and skepticism as ongoing realities to manage, not obstacles to power through once and forget about.

Find a Home-Based Business to Start-Up >>> Hundreds of Business Listings.

New Google Ad Shows a Mysterious Wearable. Is It the Next Fitbit?


Earlier this month, Google announced multiple new devices at its Made by Google event, including Pixel 11 phones and the Pixel Watch 5. Back in May, the company also released its screenless Fitbit Air health tracker.

But we still haven’t heard anything about the new mystery product that’s appeared in recent Google ads.

A Reddit thread posted on Saturday revealed a Google Pixel ad on YouTube featuring the new Pixel 11 series, the Pixel Watch 5 and an unknown wearable that looks like a cross between the Fitbit Charge 6 and the Watch 5, standing out with its oblong screen with rounded edges in fog white. Sponsored by Google Australia, the ad’s caption reads: “The ultimate power trio for your wrist, ears and hands. Preorder Pixel devices now.”

Some speculate that the product may be the Fitbit Charge 7 or a rebranded Pixel Watch series. Or maybe it’s an entirely new fitness tracker?

A Google representative didn’t immediately respond to a request for comment.

That wasn’t the only Google Australia ad featuring the surprise device. The mystery wearable appears in another ad displaying the Pixel 11 phones, Watch 5, Pixel Buds Pro 2, Pixelsnap phone cases and Watch loop bands in the new olive green color.

Real or fake?

Some Reddit commenters wondered whether this mystery product was a mistake caused by an AI hallucination — an error caused by generative artificial intelligence.

But this also wouldn’t be the first time Google sneaked an unreleased product into its promotional content. Back in March, two months before its release, the Fitbit Air was spotted in a paid partnership video with NBA star Steph Curry, who is also a Google performance adviser.

It would seem that Google is releasing a new wearable, potentially as part of its Pixel line, in both fog and olive colors. If the time between these ad leaks and the device’s release follows the same pattern as the Fitbit Air’s appearance in Curry’s video, we should know more in the coming weeks.

ICE Agents Can’t Wear Meta Glasses While They Work, Official Memo Warns


Smart glasses have become a recurring accessory amid the immigration crackdown.

Immigrations and Customs Enforcement (ICE) has reportedly told employees that they are not permitted to wear Meta glasses while they work. A memo sent to staff said that “the use of Meta Glasses or similar devices could unintentionally capture, record, or transmit sensitive information, potentially compromising privacy and legal protections,” The New York Times reported.

The policy apparently covers all employees of the agency, not just agents in the field. A Department of Homeland Security spokesperson told The NYT that workers have “always” been barred from using “personally owned body-worn cameras.” While the memo may be more of a clarification of an existing policy, the fact that ICE sent such a memo underscores how Meta’s smart glasses have become increasingly visible amid the broader immigration crackdown in the US.

ICE and Customs and Border Patrol (CBP) agents have repeatedly been spotted wearing Meta’s smart glasses over the last several months. In one case, reported by 404 Media, a CBP agent was spotted recording with his glasses despite the policy. In another instance, a member of Border Patrol wore a pair to an immigration raid. There have been similar sightings in at least six states, according to an investigation conducted by The Independent.

But while DHS is now advising staff to not use smart glasses while they work, the agency is reportedly interested in pursuing an official version of the technology. Budget documents reported by independent journalist Ken Klippenstein indicate ICE is hoping to equip its officers with bespoke smart glasses that have “biometric identification capabilities” by next year.

While Meta hasn’t publicly weighed in on whether its product is well-suited to law enforcement, an association with ICE isn’t likely to win over any new fans. The company is facing an intensifying backlash against the product. An unreleased facial recognition created by Meta has increased fears about how the device could potentially be used for surveillance. The glasses’ supposedly privacy-protecting LED has also proved to be easy to bypass.

How AI Consulting Can Help You Identify Opportunities For Automation?


How AI Consulting Can Help You Identify Opportunities for Automation?

With the age of fast-paced technology development and decision-making based on data, automation is arguably the most essential driver of operational scalability, efficiency, and innovation. Figuring out what to automate and how to do it right requires skills that most organizations may not have. It is where AI consulting shines through.

AI consultants offer not only technology recommendations but also strategic recommendations on how artificial intelligence can be leveraged to automate, reduce costs, and generate new revenue streams. In this article, we will describe how AI development companies allow organizations to unlock unseen opportunities in automation, how it is done by AI consultants, and what real benefits are achieved.

What Is AI Consulting and What It Covers?

AI consulting assists organizations in assessing, designing, and implementing artificial intelligence technology suitable for their requirements. It would typically involve

  • Audit of current workflows and data pipeline
  • Automating repetitive and rule-based tasks
  • Suggesting AI-powered tools and platforms
  • Creating proof of concepts (PoCs)
  • Successful AI solutions scaled across departments

The AI consulting companies typically employ data scientists, Machine Learning engineers, business analysts, and process optimization experts who collaborate to deliver customized automation solutions. 

Why Businesses Struggle to Identify Automation Opportunities?

Prior to proceeding with what an AI development company does, it is important to know why companies often overlook automation opportunities:

  • Insufficiency of AI talent: Most organizations are deficient in-house AI talent.
  • Limited visibility: Teams are often separated and ignorant of duplicate manual tasks.
  • Fear of disruption: People are afraid to disturb existing processes.
  • Cost issues: Companies feel that AI is too costly or difficult to adopt.

But, AI development companies can bridge the gaps by bringing in an outside-in perspective and the capability to discover the hidden inefficiencies. 

How AI Consulting Identifies Automation Opportunities?

The below is a step-by-step process on how AI consultants establish where automation will be of greatest benefit:

  1. Business Process Evaluation

AI app development companies start with a thorough examination of your existing procedures. Consultants trace flows to trace:

  • Repetitive work
  • Low-complexity, high-frequency tasks
  • Inefficient hand movements

With the help of stakeholder interviews and process mining software, they can view where automation will provide the most ROI

  1. Data Audit and Readiness Check 

AI automation depends on information. AI consultants consider

  • Availability and nature of unstructured and structured data
  • System integration points (ERP, CRM, HRMS, etc.)
  • Data privacy and data governance law

A readiness audit ensures the business is prepared to automate efficiently and safely.

  1. Use Case Identification 

From facts, there are specific applications where automation is preferable in terms of cost, speed, and accuracy. Common locations are

  • Customer service bots
  • Invoice processing
  • Inventory control
  • Predictive maintenance
  • HR onboarding
  • Targeted marketing

All the application areas are prioritized based on impact and feasibility. This helps AI application development companies analyze your industry and build tailored solutions.

  1. Technology Recommendation 

AI software development consultants evaluate and suggest the most suitable tool and platform. They can be:

This process guarantees that chosen technologies are in line with business goals and meets IT infrastructure automation needs.

  1. Proof of Concept (PoC) and Pilots

AI solution experts create pilot rollouts, or PoCs, prior to mass rollout, ensuring the project meets industry standards as well as ensures security and innovation across organization. Experts assist companies to:

  • Test pilots in a low-risk environment
  • Report on KPIs
  • Gain internal stakeholders’ support.

It is an important stage of risk management and strategy formulation prior to mass rollouts.

  1. Change Management and Training

Change management in IT is common. AI development companies build solutions that can scale with your future business needs. Automating is not a technology revolution it’s culture. Consultants help company businesses:

  • Trained staff for new workflow
  • Provide training in AI tools.
  • Oversee job loss fears
  • Develop an innovation culture.

Successful change management creates future success.

 

Real-World Applications of AI-Based Automation

  1. Customer Support Automation

One major e-commerce company retained an artificial intelligence consulting firm to lower the call center volumes.

  • Employed AI chatbots for FAQs
  • Applied NLP for distribution of tickets wisely.
  • Employed sentiment analysis for angry customer labelling

Outcome: 40% reduction in response time and 30% fewer support tickets.

  1. Accounts Payable Automation

The accounts receivable of a manufacturing firm can be automated with AI software solutions. Manufacturing units can reduce invoice processing by 70% and achieve accuracy up to 90% with AI automation. AI applications in manufacturing are

  • Digitalized and scanned paper bills
  • Imported relevant domains through ML
  • Used by ERP to facilitate automated approval cycles
  1. HR and Recruitment Optimization

AI recruitment solutions help organizations completely automate hiring processes, from resume screening to interview scheduling and grade analysis.

Implementation of an AI-powered recruitment platform and HR processes automating solutions can decrease 50% of process times and improve operational efficiencies of the departments. AI can automate:

  • Parsing of resumes by NLP.
  • List the candidates’ work availability in order
  • Bot is scheduling interviews 

Top Benefits of AI Consulting for Automation 

AI consultants offer a fresh perspective that identifies inefficiencies that homegrown teams might miss.

Concentrating on high-impact opportunities through automation offers quicker value realization.

AI development companies in India and USA can create automation plans tailored to your business, company size, and objectives, ensuring that the custom AI solutions meet your future needs.

They stay up to date with all the new trends, hardware, and platforms that AI is using in an attempt to provide the best possible suggestions that they can.

With rollouts sequenced and pilots to showcase applications, implementation risk decreases by consultants.

How to Choose the Right AI Consulting Firm? 

To achieve the best possible automation, choose AI consultancy services that:

  • Is solidly based in your field
  • Provides turnkey solutions from design to installation
  • acquainted with business processes and AI technologies
  • Provides training and change management assistance
  • Departmental and geographic scalability solutions
  • Verify AI partner environment (i.e., Microsoft, AWS, Google Cloud), customer success stories, and case studies.

Future-Proofing Your Business Through AI Automation

AI automation is no longer about saving human effort it’s a question of business model transformation, customer experience, and competitiveness. Your best guides on this transformation are AI consultants, who will guide you to unlock and capitalize on AI opportunities that help you drive automation and innovation across processes. Whether you are just starting to explore test automation or need to accelerate what you are already doing, AI consulting firms provides you with the strategy, tools, and confidence to make the transition.

What Could Be The cost of AI development in 2026?

The cost of AI development depends on the project’s size, complexity, and specific technology and integration requirements. Basic projects, such as AI chatbots or simple automation tools that use standard AI models and limited integration, typically range from $10,000 to $50,000.

On the other side, mid-level AI projects, like fraud detection systems or AI recommendation engines, cost between $50,000 and $250,000. These AI initiatives involve more sophisticated algorithms, data, cloud deployment, and multiple integrations.

Enterprise-level AI solutions, such as generative AI models, large-scale predictive analytics, or computer vision systems, can cost anywhere from $250,000 to over $2 million. Because, these AI projects needs custom development, data infrastructure, and continuous monitoring and updates.

Other factors that influence overall costs include data acquisition and cleaning, the use of cloud platforms like AWS or Azure, the availability and cost of experienced AI developers and data scientists, regulatory compliance needs, and long-term maintenance and model retraining.

 

AI consulting helps organizations identify where automation will have the greatest impact by combining process analysis, data readiness assessment, and technology recommendations. Rather than starting with a tool, consultants start by auditing existing workflows and data pipelines to find repetitive, rule-based tasks that are good automation candidates.

Why businesses miss automation opportunities on their own:

  • Lack of in-house AI talent
  • Siloed teams unaware of duplicate manual work across departments
  • Fear of disrupting existing processes
  • Perception that AI is too costly or complex to adopt

How AI consultants identify opportunities — a typical process:

  1. Business process evaluation — mapping workflows to find repetitive, high-frequency, low-complexity tasks
  2. Data audit and readiness check — assessing data quality, system integrations, and governance/privacy requirements
  3. Use case identification — prioritizing candidates like customer service bots, invoice processing, inventory control, predictive maintenance, and HR onboarding by impact and feasibility
  4. Technology recommendation — matching use cases to RPA, NLP, machine learning, or computer vision as appropriate
  5. Proof of concept and pilots — testing in a low-risk environment before full rollout
  6. Change management and training — preparing staff and addressing concerns about job impact

Example outcomes cited: a 40% cut in response time and 30% fewer support tickets from AI-driven customer support; up to 70% faster invoice processing with 90% accuracy in accounts payable automation; and roughly 50% faster hiring cycles through AI-assisted recruitment.

Typical costs (2026): basic automation projects run $10K–$50K; mid-complexity projects (e.g., fraud detection, recommendation engines) run $50K–$250K; enterprise-scale AI (generative AI, large predictive systems) can exceed $250K–$2M+.

Conclusion

Artificial intelligence–based automation is changing how companies operate but unlocking its full value is about something more than tech. It is a thoughtful, evidence-based response that AI consultants are best placed to give. Through identifying the appropriate opportunities, developing intelligent workflows, and pushing organizational change, AI consulting allows you not only to improve operations but also to build enduring strategic value.

Get in touch.

 

Securing the Infrastructure of Intelligence



AI factories are the defining infrastructure of the AI era — where compute transforms energy and data into intelligence that powers every business, industry and country.

In the AI economy, compute is revenue.

AI factories require a full stack of critical resources: advanced chips, packaging, memory, and networking — as well as land, power and shell.

Just as NVIDIA has used its scale, long-term visibility and supply-chain partnerships to secure critical semiconductor resources, we are now applying that same discipline to secure LPS capacity exclusively for NVIDIA AI factories.

Today, we are partnering with SB Energy to secure LPS capacity at the exceptional PORTS-Pike Technology Campus in Portsmouth, Ohio, to host NVIDIA compute. OpenAI will be the tenant.

LPS: The Next Strategic Resource

For the vast majority of NVIDIA customers, securing LPS has long been a part of their infrastructure strategy.

The world’s largest cloud service providers and investment-grade enterprises have balance sheets, infrastructure expertise, and long-term contracts to secure LPS independently. They build and operate AI factories using NVIDIA accelerated computing, networking, systems and software.

This model will continue to represent most of NVIDIA’s business.

But frontier AI labs are different.

Frontier AI labs have extraordinary demand for training and inference compute, but many are growing faster than their balance sheets and long-term credit profiles can support. They may have strong customer demand and rapidly growing revenue yet still lack the decades-long infrastructure contracts and investment-grade financing capacity needed to secure the AI factory infrastructure independently.

Their growth is increasingly constrained not by algorithms or customer demand, but by the availability of compute.

For these companies, more compute means more intelligence, more products, more users and more revenue. NVIDIA is helping provide the infrastructure that powers this flywheel.

PORTS-Pike: A Site for Generations of NVIDIA Compute

OpenAI will build and operate a world-class AI factory at PORTS-Pike. The AI factory will use NVIDIA’s full-stack DSX AI factory platform, including GPUs, CPUs, networking, and infrastructure software.  

The initial deployment is expected to provide 4.25 gigawatts of AI factory capacity. Each generation of NVIDIA AI factory systems deployed at PORTS-Pike could represent approximately 1.5 million NVIDIA GPUs, or approximately $150 billion to $200 billion in NVIDIA revenue. Over 20 years, the site can support multiple upgrade cycles. 

This is the essential economic point: the LPS commitment secures a long-lived AI factory site, while the NVIDIA compute inside can be upgraded repeatedly. Each new generation can deliver greater production, more intelligence and better economics. 

NVIDIA may also choose to extend the arrangement at PORTS-Pike beyond the initial 4.25 gigawatts to secure the remaining capacity of 3.75 gigawatts. 

OpenAI and NVIDIA Expanding Compute Opportunity

More broadly, OpenAI has committed to substantial deployments of NVIDIA AI infrastructure through 2030. OpenAI’s existing and planned commitments represent approximately 12 gigawatts of NVIDIA compute, with an opportunity to expand to approximately 16 gigawatts if NVIDIA extends the PORTS-Pike arrangement beyond the initial 4.25 gigawatts. 

At these levels, the opportunity represents roughly $600 billion of NVIDIA compute through 2030. 

The Important Questions

What is NVIDIA guaranteeing, and for how long?

NVIDIA is supporting the LPS infrastructure at PORTS-Pike for approximately 4 gigawatts over a 20-year term, securing a site on which NVIDIA compute will be exclusively deployed.  

Our support is limited to defined portions of lease and power payments, along with a specified residual-value commitment — not the full cost of the site or all of the tenant’s obligations.   

The guarantee will become effective in phases as data centers are placed in service between 2028 and 2030.  As OpenAI makes lease payments and capacity comes online, NVIDIA’s remaining exposure declines.

Why is NVIDIA guaranteeing PORTS-Pike?

LPS has become a critical constraint on AI factory deployment. NVIDIA is selectively securing exceptional sites where we can host multiple generations of NVIDIA compute and serve durable customer demand. 

The productive life of the site extends through multiple generations of NVIDIA systems, each capable of producing more intelligence and more revenue than the generation before.

Is this circular financing?

No. OpenAI will pay the lease.   

NVIDIA uses its scale and long-term visibility to secure PORTS-Pike to host NVIDIA compute. This is the same discipline we apply to supply-chain management: we secure critical inputs when we have visibility into customer demand and when doing so enables long-term productive capacity.

What happens to PORTS-Pike if OpenAI does not use the site in the future?

NVIDIA compute is versatile, fungible and broadly adopted. The capacity can be resold to another qualified tenant across NVIDIA’s global ecosystem of cloud service providers, enterprises, AI labs and startups. 

CUDA makes NVIDIA compute more than hardware. It gives developers and NVIDIA engineers a common platform to continually improve installed systems. 

CUDA makes NVIDIA compute versatile. Versatility makes it fungible. Fungibility drives utilization and durability — making NVIDIA compute a productive asset: rentable and financeable. 

The value of an exceptional site, like PORTS-Pike, is not limited to one customer or one generation of compute. NVIDIA’s standardized platform, broad developer ecosystem and large market of potential users support the ability to redeploy productive capacity over time.

How much LPS will NVIDIA secure?

It will be strategic and disciplined. 

Most NVIDIA customers will continue to secure their own LPS.  The vast majority of LPS hosting NVIDIA compute will continue to be secured directly by CSPs, enterprises, sovereign AI builders and other customers. 

NVIDIA will focus selectively on exceptional sites where visible, durable demand can support multiple generations of NVIDIA compute.

The Infrastructure of Intelligence

PORTS-Pike represents the next step in NVIDIA’s journey. 

We began by building accelerated computing chips. We then expanded to systems, networking, CUDA and full-stack AI factories. Today, we are helping secure the critical infrastructure required to build these factories. 

NVIDIA is the full-stack AI infrastructure platform. 

We are investing in the long-lived foundations of AI factories so our customers can deploy the most productive compute platform in the world, generation after generation. 

By securing the critical resources needed to host NVIDIA compute, we can help the world’s most innovative companies build the AI factories that will power the age of intelligence.

Warp’s new system is an out-of-the-box software factory for AI development


Companies are still grappling with exactly how software development should work in the AI area, but one early answer is the so-called software factory. Essentially an agent loop that’s built around the traditional stages of software development, the software factory approach has become a popular way for companies to remake their engineering organizations for the AI era.

Now, a system from Warp could make that transition a lot easier. On Tuesday, the AI coding company introduced Warp Factories, a new system designed to make building and operating AI software factories as easy as possible.

Operating as an infrastructure layer, Warp Factories gives companies a simple environment for deploying agents and a roadmap for how to use them.

To be clear, many companies are already having success with the factory model without any help from Warp. Stripe has been particularly public about its technical progress, developing a “minions” system to automate development within its own codebase. Ramp has made similar progress, developing a background agent that can monitor its own code after it is deployed.

An analytics screen from Warp FactoriesImage Credits:Warp Factories

As Warp CEO Zach Lloyd sees it, the target market for Warp Factories will be smaller companies without the resources to develop a system from the ground up.

“[If you look at] things like running your agents in the cloud and steering those agents as they run, or bringing the work that they’re doing into your local environment, or setting up memory that goes across those agents, or setting up evals that go across those agents — it’s actually a huge infrastructure undertaking to do this right,” Lloyd told TechCrunch.

In Warp Factories, the architecture is already built out of the box, with many of the most difficult decisions already made. Warp’s system is based on the standard phases of software development (triage, specification, implementation, review, and verification) but the agentic approach means any of those steps can be automated.

Users can choose their own coding model and harnesses as necessary; the system works as well with Codex as Claude Code. It also integrates with ticketing systems like Linear and Jira, and messaging systems like Slack and Teams, in an effort to plug in seamlessly to existing workflows.

Beyond just shipping code, Warp Factories will also give managers the tools to track how well the factory is performing. With all the agents running in the same environment, it’s easy to compare performance metrics for different configurations, and to keep an eye on the overall token spend. Warp Factory also allows for self-improvement loops to optimize the overall system, automating management of the process itself.

Even so, Warp Factories is not built to completely replace software engineers — just give them an easier way to collaborate with the new agentic workforce. In Lloyd’s own experience, there are still a lot of tasks that require a human at the wheel.

“We automate like 30% of our tasks, 30 to 35% on a weekly basis,” Lloyd told TechCrunch, “and as models improve, as the context improves, as the harness improves, I think that that number is going to go up over time.”

When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.