Longtime Slashdot reader AmiMoJo shares a report from the BBC: August was the joint-hottest month ever recorded, tying with July 2023, according to the EU’s climate service. The record was driven by a combination of climate change and the rising influence of El Nino, pushing heat into the atmosphere across the Pacific. Temperatures for the month were 1.65C above pre-industrial levels — surpassing the critical 1.5C threshold agreed by countries to avoid the worst consequences of climate change. While a single month above 1.5C does not mean it has been permanently crossed, it shows a trend towards breaching that limit. The month also capped western Europe’s warmest summer, with high temperatures pushing the season past the deadly heat of 2003.
Whether you’re a Valheim veteran or playing for the first time, at some point you’re going to stop and ask “Is there any way to increase the size of my inventory? And finally, as of Valheim 1.0, the answer is yes, you can!
Inventory size in Valheim is famously small, with just eight hotbar slots and 24 inventory slots. Especially since worn armor takes up slots, your inventory is going to be full quickly and constantly, making it tough to haul back all the loot and resources you find in the world. At long last, there’s something you can do about it.
How to increase your inventory in Valheim
(Image credit: Coffee Stain Publishing)
Visit Haldor. The NPC merchant in the Black Forest now sells two inventory upgrades in exchange for coins, with each upgrade giving you an extra row in your inventory, meaning you can add a total of 16 extra slots.
Latest Videos FromPC Gamer
Here are the inventory expansions Haldor sells:
Wider pockets (+8 slots): 1000 coins
Deeper pockets (+8 slots): 2000 coins
How to find Haldor
If you’re new to Valheim, you may not have run into Haldor yet, and he can be hard to find. The vendor will only appear in the Black Forest biome, and there’s not many ways to find him besides just going out into the world and looking.
To find Haldor in a Black Forest biome, you’ll need to be at least 1,500 meters away from the center of the map. (There’s a console command, “pos”, that shows your coordinates and distance from the map’s center—to learn how to use it, please visit our page on how to use Valheim console commands.)
You can also try putting your Valheim world seed into a third-party utility like the Valheim World Generator, though it may not show Haldor’s location reliably until it’s been updated to support Valheim 1.0.
Keep up to date with the most important stories and the best deals, as picked by the PC Gamer team.
When you get within a couple hundred meters of Haldor’s camp, a white bag icon will appear on your minimap.
As for the coins you can spend at Haldor’s camp, you can find them in chests, dungeons, and by killing monsters like trolls and fulings. You can also sell items like rubies, amber, and silver necklaces to Haldor in exchange for coins.
3D visualization technology services has evolved into more than just simple imagery or an architectural representation. It has grown into a more innovative means to validate designs and promote an even more seamless collaboration with the internal team. Cad Crowd is a platform that connects firms with professionals who have expertise in advanced digital technologies, making sure the services are aligned with updated innovations.
🚀 Table of contents
1. Generative AI for texture mapping
One of the most important parts in creating visualizations is their textures and finishes. To make it more realistic, architects would have to search thoroughly in the texture libraries for the most natural-looking hyper-realistic texture. It is a tedious search that consumes a lot more time than intended. Generative AI is a game changer as it automatically generates a texture based on simple text descriptions. This significantly speeds up the process of looking for a material texture that is accurately aligned with the architect’s preference. Through this, architects would have a lot more time to explore different styles just by describing them in words.
One of the major advancements nowadays is Real-time ray tracing. This means that instead of waiting for the final render to be processed before seeing how light behaves, architects can now manage it in real time. This way, they can adjust it conveniently while in the design process. This makes it a lot easier for the architects to understand just how light behaves as it enters the building and make decisions on the spot in case there’s a need to do so. This whole thing speeds up the decision-making and helps designers to focus more on making the design better and more efficient.
3. Digital twin integration
Digital twins allow architects to see and visualize how a building interacts or behaves in its environment. It includes exposure to environmental factors such as weather, sunlight, and even traffic flow around the area. This provides a more realistic overview of how a building fits in the area. This helps the architects understand what the building needs. For instance, architects would design façades that are suitable for the wind strength they experience. Or how the windows will be placed based on the sun path to obtain more natural lighting during daytime. This is helpful in the early planning stages to make the design more intentional.
4. Immersive VR walkthroughs
Virtual Reality (VR) services has become more of a practical communication tool when it comes to helping clients understand what the building looks like. With a high-quality VR walkthrough, clients can now walk inside the building and experience a true-to-life scale of the room areas. It gives them a unique feel of what it is like to live there. This immersive experience is a lot more client-friendly since they can easily understand how the rooms would look. It helps in reducing confusion when they’re just reading the 2D technical drawings. It gives them a lot more perspective and feedback, making it easier to communicate what they think of the building.
One of the useful advanced innovations in the visualization field is Neural Radiance Fields (NeRFs). NeRFs make use of 2D images, like a photo of a site, and generate a 3D environment from it. This is often used for projects such as retrofitting or renovations wherein an existing site has to be captured and taken into account. This is a much more accurate generated model of the site. Compared to doing laser scanning, NeRFs is able to produce a realistic visualization efficiently without being too expensive or costly. It not only improves turnaround times but also accuracy.
6. AI-driven crowd simulation
Before, architects would have to manually add people who are suitable for a specific building. They’d have to search and browse for it in a library and tediously scale it to fit. Now, populating a space with realistic people is not a tedious task anymore. This is now made easier by AI crowd simulation. It allows architects to generate a population of people acting in the place the way it should. There’s no need to manually think of how people behave in it because AI can already generate it. This is an efficient way of showing how a building interacts with the people in it.
7. Cloud-based collaborative rendering
Renderers are known for their expensive on-site rendering hardware and long turnaround time to process the final output. Now, the technology has allowed sending 3D files to the cloud and has high-end servers to handle and process them. From there, an instant visualization can be delivered. Instead of waiting up to weeks for rendering, it can now be done in a matter of minutes or hours, depending on how massive the file is. The speed-up of the turnaround time is helpful for architects to see where they’d need adjustments and fixes faster. This also helps startup studios who don’t have that much capacity to produce high-end renders.
Now that the world prefers sustainable designs, there are visualization tools that allow one to see integrated greenery in the building. This means that instead of just seeing green plants on a certain design, you imagine how it thrives and grows. Biophilic visualization can be used to simulate the realistic growth of the vegetation. To produce an even more accurate simulation, environmental data such as rainfall, sun exposure, and other climate conditions can be set and adjusted. This way, it can be predicted how the plants will grow over a period of time.
9. Augmented reality (AR) site overlays
One of the most useful technologies in construction is AR, or augmented reality process. With just a tablet, architects can overlay the 3D model onto the actual physical site. It creates scenic imagery on the actual site, giving clients an experience of what it looks like inside the building. This makes it easier to understand and visualize the overall spacing and feel of the room. The spatial layout will be more visualized, such as room heights, window placements, and other things inside the room. This overlay makes it easier to see the design impact on the actual site.
10. Cinematic storytelling engines
Modern visualization has now improved the way it represents the building or project. It’s no longer limited to minimalistic or the usual sleek views. It can now incorporate specific feels into it to convey a story of how the building will be lived in. This visualization innovation is more beneficial when it comes to marketing. It is more appealing for the buyers when they can relate to the visuals. To do this, elements such as lighting, weather effects, and other atmospheric things are tweaked to make it feel emotional and engaging.
Visualization is now not limited to just seeing what the space looks like; there’s now added sensory feedback wherein clients can feel surfaces. This is an immersive and interactive experience that helps clients have an even deeper understanding of the space and make decisions instantly. With this level of experience, there’s confidence for the clients to set their expectations. By combining seeing and feeling the space, it’s indeed a game changer for the visualization world. It has drastically closed the gaps between reality and virtual reality.
12. Automated BIM-to-render pipelines
There is now an automated BIM-to-render pipeline to simplify the tedious process of transforming a building model into a visualization. The once manual process of exporting from BIM to rendering software can now be made easier by synchronizing features. In just a click, the adjustments made in BIM will be reflected and updated in the 3D visualization services. This reduces outdated visuals and mismatched details. It helps the overall accuracy of the building and improves turnaround time in producing visualizations. It has also significantly improved the communication process from feedback to generated output.
13. Short-form “social media” renders
Now that people are more exposed to 15-second videos on social media platforms, the architecture and design field has also caught up in it. Instead of doing long videos of walkthroughs, it has now been limited to a short 15-second animation. This way, it is more focused and intentional. Doing this allows the marketing team to use it on social media platforms and earn engagement. This type of content could be useful to reach a larger audience and improve its popularity. It also makes the architect’s style known.
During presentations, visualizations are now not limited to just showing what a building looks like in one scene or view. The architects can now toggle other seasons or weather conditions in real-time to show what it looks like. They can easily show a client a year-round feel of the building. While it is visually appealing, especially for the clients, it also shows practical visualization. It gives the audience an understanding of whether the building can really perform well even under weathering conditions. It is better to understand how the conditions affect the building in real life.
15. AI denoising for fast previews
One of the struggles during early-stage rendering is how grainy or noisy the images are. It makes it difficult for architects to get a whole picture of what they’re working on. They have to wait a long time before they can see what it looks like. AI resolves this issue by turning the grainy previews into polished images instantly. It has significantly helped architects to focus on creating and designing. It allows them to explore more creative ideas since they wouldn’t have to wait a long time just to see what it looks like.
16. Procedural building generation
In urban planning services, the architects would need to visualize how supporting buildings can rise up around the main building. Instead of manually thinking and creating these buildings, they can now be generated using rule-based systems. This is useful for urban planning since it can generate the whole neighborhood just by providing context and rules. It gives a realistic urban neighborhood and shows how it fits the city. This is a more efficient strategy when it comes to urban planning to help in making consistent developments in a realistic environment.
3D generative fill is used to easily and conveniently add elements that are missing in the realistic scene. It could be adding environmental details such as trees, vegetation, flowers, parks, street ornaments, or other elements that are suitable for the scenario. It significantly helped architects to focus on other visualization processes instead of spending more time searching for the right element to fill in the environment. The generated fills are also more visually appealing since they match the design style and wouldn’t feel off, unlike just manually adding what’s available in the library.
18. Photorealistic metadata avatars
In a walkthrough design process, it is now possible to make it feel like entering the building space with other people. This is through metadata avatars, wherein clients can see themselves as well as everyone else visiting the space. Everyone can see each other despite being in different locations. This experience makes it a lot more realistic and immersive. It feels natural how you see someone you know walking in the space across from yourself. This can be useful for the design team and stakeholders to collaborate efficiently and point out concerns on the spot, making the decision-making process quicker.
19. Volumetric clouds and atmosphere
Sometimes clouds are seen as elements that don’t carry much existence or impact to the building. But actually, it wasn’t just a flat background. Realistic clouds can be utilized to make the environment more alive and natural-looking. This is possible by utilizing Volumetric cloud technology. 3D skies are more than just a background since it subtly shifts perspectives from every viewpoint. It can add shadows and alter the overall lighting. This is more important for the animations and cinematic architectural visuals since it adds context to what mood it sets.
Live sun study visualizers allow architects to set and simulate the sunlight in a way they projected it to a specific time throughout the day. This way, they wouldn’t have to just rely on static diagrams and switch to using timeline sliders to see and adjust sunlight. Aside from adding a cinematic feeling in the visuals, it is actually important for the architects to know and lay out window placements and shading devices. Knowing how much sunlight enters the building can help architects design a layout that makes it a comfortable place to live in.
21. AI-assisted asset optimization
3D models can become sluggish and hard to hover around and manage, especially when they become too large. This is because it contains numerous detailed elements, heavy geometric elements, and a background. This is even more difficult to work with if the computers are just at a standard level. AI-assisted asset optimization services helps in resolving this struggle by simplifying the background. It does not necessarily mean it would lose its quality since its appearance will still look the same. This helps the computer catch up with the render and perform well.
22. Metaverse showrooms
Architecture has taken advantage of VR and 3D visualization and is now building 3D showrooms in the metaverse. This allows the clients to view the architect’s work in 3D. Doing so would make a client feel like they are working on an exhibition. This is a convenient gallery since it’s virtual and can be visited by anyone. It helps the architects showcase their works in a more immersive way, proving how they deliver a strong sense of spatial understanding. This is actually also used by developers showcasing their works for potential buyers to see and browse through.
Direct-to-glass projection mapping is, somehow, based on its name; it is a projection of the visualization on an actual site. This can be done using large-scale projectors and usually at night so it can have full visibility. This allows the audience to see a realistic view of what will be built, on a realistic scale. This helps them to fully grasp and understand what it will look like on site. Projecting the visualization helps in supporting public feedback and making it a lot easier to communicate the design intent.
24. Physics-based material simulation
Physics-Based Material Simulation, or PBS, improves the way material looks in the visualization. Instead of seeing a flat surface, the materials can be seen the way they look in real life. It simulates how a material acts or behaves with light, whether it absorbs, diffuses, or scatters it. This is more applicable to projects that are high-end and premium, where material finishes matter. This allows the architects to check if it looks aligned with the branding and luxurious feel the client preferred. It makes the decision-making process easier and faster.
25. Voice-controlled design navigation
Voice commands are now in 3D presentations, wherein architects can just use them to navigate through the 3D models expertise. It involves commands such as “take me to the living room” or “show me the bedroom”. It could also make adjustments in the designs by saying “change the flooring into oak”. This kind of presentation allows the presenters to fully converse with a client instead of making adjustments on their laptops or keyboards. It is an easier approach to demonstration that makes a client have a better connection with the project.
Large World Models or LWMs are an advanced technology wherein they can predict how a certain 3D space will be filled based on a specific design style. It helps in analyzing the room arrangement and filling it in with elements that are appropriate for that environment. The design layout of the room depends on the set style, mood, and budget of the project. It acts as a design assistant, actually, as it helps in filling in interior spaces. The visualization process would be sped up since there’s no need to manually edit and brown for interior elements.
27. Automated clash detection visuals
The purpose of visualization is not limited to just showcasing its physical appeal, but also helps the engineers to check for technical issues. In construction, clashes are often found on site. For instance, a structural beam clashes with a pipe. When this happens during construction, there would be a need for rework. Now, visualization allows clashes to be identified early on, even before construction. This allows the engineers and designers to fix it to avoid costly rework. It makes it a lot more convenient for the internal team to collaborate on a project and improves decision-making.
28. “Scan-to-BIM” visualization
One way to produce 3D models is by scanning real-world structures and converting them to a model. This can be done with 3D scanners and point clouds design services. The data generated will be transformed into a BIM. This will now be the workspace for architects to do the planning and design. This is a more appropriate method for renovation projects that need an existing building to be drawn. It makes it a lot easier instead of manually drawing it in. It improves the accuracy of the drawing and reduces turnaround time, matching the model to the existing structure.
One struggle before was how renders would be shared for the client to view. WebGL Browser allows everyone to have access to the 3D models without having to install the software used. This simplifies the whole sharing system and is convenient to use since it can be opened even with just a tablet or smartphone. Since this works on a browser, there’s no need to send back and forth large files. It would be easier to communicate feedback and work more efficiently. It has significantly expanded access, especially to clients who are not well-versed in technology. This allows them to feel more involved, which speeds up decisions and approvals.
30. Parametric visualization dashboards
Visualization is not the only one that matters in decision-making. There are project data that also influence it, like cost and energy performance. The construction and architectural industry can now see a dashboard to reflect this technical information. This allows viewers to see how a design is backed by technical metrics. Whenever there’s a change or adjustment being made in the design model, the dashboard also updates its data. This makes it a lot easier to portray how the building performs in real life. It shows balance in visuals, functionality, and sustainability.
31. AI post-processing for architecture
Visualization style is now not limited to the usual sleek modern style render. Specialized AI filters can transform a3D model design into a different style like watercolor or pencil sketch. This makes an architect express their style in a more creative way. It can also be utilized when it’s just meant for a presentation or a feasibility study, when the drawings are not meant to be finalized. Changing styles helps in conveying concepts and ideas. It can also be used to polish consistent styling aligned with the company’s or the architect’s branding.
There is a significant difference when a person can touch the physical model instead of just seeing it. 3D printing technology allows a full tangible experience by turning a design model into a physical one in a matter of hours. This can be done by 3D printing experts. This is a lot more useful during presentations wherein it is needed to share a memorable experience. With 3D physical models, people can see and view them from different angles. It allows decision-making to be done quickly since they clearly see the design concept.
33. Global illumination (GI) for interiors
Lighting matters in interior spaces. This can be simulated and calculated in 3D visualization and allows architects to control or tweak as needed. Global Illumination, or GI, is considered an advanced lighting technique that makes the lighting look more natural than calculated. Using GI transforms sharp or flat lighting into realistic lighting. It makes the visualization more natural-looking, like it’s not a render but a photograph. This is much more important for a design that prioritizes the mood or the storytelling of the visualization. It gives mood and behaviors to light that allows emotional engagement with the viewers.
34. Dynamic lighting for smart cities
Since the world is adapting to sustainable choices and methods, energy-efficient options are much preferred. In urban planning, instead of having all the streetlights operate at the same time, they can have a smart-adjust feature. This planning can be simulated in 3D visualization, wherein planners can check preview lighting. With 3D visualization, urban planners can consider pedestrian movement and traffic to know and adjust lighting operations. This allows them to plan smartly and present to officials so they can easily grasp the concept of sustainable planning. This improves the overall energy usage while maintaining public comfort.
With the use of VR, there is now a more collaborative approach when it comes to design review and approval. In this approach, clients and architects can enter the same virtual space together at the same time. As they explore the space, feedback and comments can be relayed easily. It is a lot easier for clients to understand and point out their preferences. This not only improves the turnaround time of design approval, but it also strengthens the relationship between designer and client. This is so since in this approach, clients would feel much heard and involved in the decision-making process.
Estimated 3D visualization service costs
3D Visualization Service
Typical Cost (USD)
Basic exterior 3D rendering
$300–$800 per image
High-end photorealistic exterior render
$800–$2,500+ per image
Interior architectural rendering
$400–$1,500 per image
3D floor plan rendering
$200–$700 per floor plan
360° panorama rendering
$500–$2,000 each
Architectural animation
$2,000–$10,000+ per minute
VR walkthrough experience
$3,000–$20,000+
Augmented reality (AR) visualization
$5,000–$25,000+
Digital twin visualization
$10,000–$100,000+
BIM-to-render visualization
$1,000–$8,000+ per project
AI-assisted visualization & rendering
$500–$5,000+ per project
Interactive WebGL 3D model
$2,000–$15,000+
Conclusion
The advancements in 3D visualization have made the once traditional styles into a more interactive and immersive experience. The innovations are proof of how architecture has continually thrived to catch up with modernization. It allows the processes to be a lot simpler but efficient. Cad Crowd gives access to vetted professionals who are experienced and skilled in visualization innovations to help brands align with the trends.
How Cad Crowd can help
Whether you’re adopting AI-powered rendering, immersive VR walkthroughs, digital twins, or advanced architectural visualization workflows, Cad Crowd connects you with experienced 3D visualization specialists who can bring your ideas to life. Our global network of vetted professionals helps firms create high-quality visualizations, realistic renderings, BIM-integrated models, and interactive presentations that improve collaboration, streamline design decisions, and enhance client engagement. Request a free quote today and find the right visualization expert for your next project.
MacKenzie Brown is the founder and CEO of Cad Crowd. With over 18 years of experience in launching and scaling platforms specializing in CAD services, product design, manufacturing, hardware, and software development, MacKenzie is a recognized authority in the engineering industry. Under his leadership, Cad Crowd serves esteemed clients like NASA, JPL, the U.S. Navy, and Fortune 500 companies, empowering innovators with access to high-quality design and engineering talent.
Both of Nintendo’s Switch consoles have been cursed with deafening silence in their menus and eShops. But the latest version 23.0.0 update for the Switch 2 at least injects a little bit of personality and nostalgia into one of the platform’s menus, bringing back music for the Mii Maker.
When you create a Mii in the Switch 2’s system settings, the familiar Mii Channel music from the Wii now plays in the background. A music settings button on the top left also lets you change the track to the 3DS or Wii U Mii Maker music (the tracks are generically named “Track 1,” Track 2,” and “Track 3”).
Certain Nintendo fans feel that the company’s platforms have lost some of their soul with the lack of music and visual themes, so this update, as small as it is, can be taken as a nice gesture.
Unfortunately, both Switch platforms are still without any eShop background music or visual themes. Nintendo omitted these menu elements for the first Switch to save processing power and allow users to quickly navigate the UI to start their games. At the very least, it seems like the Switch 2 has some extra juice to accommodate some Mii music.
The Switch 2 firmware update allows users to share their Miis through QR codes. While Miis might not be as big a deal for Nintendo as they were in the Mii days, the cartoony avatars are still very much a part of modern games like Tomodachi Life: Living the Dream and the upcoming Nintendo Switch Sports Resort.
Google has officially removed the Pixel Tablet from its online store after listing it as out of stock.
The Pixel Tablet has also disappeared from major retailers including Amazon and Best Buy.
Google reportedly canceled plans for second- and third-generation Pixel Tablets due to sales and profitability concerns.
Existing Pixel Tablet owners will continue receiving software updates until mid-2028 despite the lineup’s end.
The Pixel Tablet is finally dead. Like, properly dead dead.
Google launched the Pixel Tablet back in 2023 as a hybrid device that could work as both a traditional Android tablet and a smart home display when placed on its charging dock. At $499, the Pixel Tablet offered a pretty interesting combination on paper, but reactions to the device were mixed after launch.
Google reportedly had plans for a second-generation Pixel Tablet in 2025 and even a third-generation model in 2027. But amid poor sales and profitability concerns, the company reportedly pulled the plug on those plans back in 2024. Despite that, the original Pixel Tablet remained available through the Google Store and retailers for quite some time. Until now.
(Image credit: Nicholas Sutrich / Android Central)
As spotted by Jetstream, Google has officially removed the Pixel Tablet from the Google Store. The tablet was listed as “out of stock” until a few days ago, but the product page has now been removed altogether, effectively confirming that Google is done selling the device. The Pixel Tablet has also disappeared from retailers, including Amazon and Best Buy.
That means there’s now no official way to buy a new Pixel Tablet. You may still be able to find remaining stock through smaller online retailers or pick one up from a reseller, but Google’s own inventory is officially gone.
The good news for existing Pixel Tablet owners is that software support isn’t ending anytime soon. Google is expected to continue supporting the device with updates until mid-2028. But unless Google decides to resurrect its tablet ambitions again, there won’t be another Pixel Tablet waiting to replace it.
The Pixel Tablet was an interesting idea. Having one device that could work as both an Android tablet and a smart home display made plenty of sense, especially inside Google’s ecosystem. Unfortunately, the idea never really took off.
Get the latest news from Android Central, your trusted companion in the world of Android
So, RIP Pixel Tablet. This time, it looks like it’s actually over.
Retroid has revealed the Pocket Duo and Pocket Duo Lite.
Both handhelds will come with a 6,000mAh battery.
The Pocket Duo will cost $269, while the Duo Lite will start at $149.
Earlier this week, Retroid released the first teaser for its next Android-powered handheld. At the time, we only knew that it was called the Pocket Duo and that it would have two screens, like a Nintendo 3DS. Since then, Retroid has provided more details, including specs, models, and pricing.
As the company revealed, the Retroid Pocket Duo will actually come in two forms: the Pocket Duo and Pocket Duo Lite. Design-wise, the two handhelds will look similar, but there are a couple of differences. One is that the secondary display on the Duo is slightly larger than that on the Duo Lite. The other difference is the layout of the L1/L2 and R1/R2 buttons. These buttons are laid out horizontally on the Duo Lite, while L1 and R1 are on top of L2 and R2 on the Duo.
Another PC game launcher is being taken out to pasture. It seems that Ubisoft will be the latest game company to move away from including its own launcher with Steam games. According to a Reddit post by NostalgiaKeeper007, the company is testing an update that will have itsSteam games support existing Ubisoft Connect features, like cross-play, cross-progression, and more, without requiring the Ubisoft Connect PC launcher to be installed or launched. The company is allegedly testing the change with Prince of Persia: The Lost Crown.
“This first version is an initial step toward a smoother and more streamlined experience on Steam,” the alleged post from Ubisoft reads. “We will continue to iterate and improve Ubisoft Connect Services over time, with the goal of delivering the features and services players use and expect while making the Steam experience as seamless as possible.” It seems that the initiative won’t stop with just The Lost Crown, as “Ubisoft Connect Services will progressively evolve and roll out to more Ubisoft games on Steam in the future.”
Reddit users celebrated the death of the Ubisoft Connect launcher. “Please dear Lord roll it back to previous Ubisoft games so I can play them on steam machine without proton tricks,” one user commented.
Get Polygon’s Wishlister newsletter
A weekly cheat sheet to what you’ll eventually love to play. No buying, no
commitment — just saving for later.
Why did players hate the Ubisoft Connect PC launcher?
As for why the Ubisoft launcher was unpopular, many players generally dislike mandatory launchers for PC games. For one, this requires users to open Steam, and then open a second launcher. More pressingly, these launchers are often associated with other drawbacks, like requiring publisher-specific accounts to access certain games and built-in DRM.
In a particularly extreme example, the Sony-published Marvel Tokon: Fighting Souls requires players to log into a PSN account on Steam, which is a problem because the service isn’t available in many countries. In Tokon’s case, players have also speculated that the PSN services running in the background also tank performance, prompting modders to find a way to remove the game’s DRM, resulting in huge performance increases. While Tokon doesn’t use a launcher, Sony’s general handling of the game embodies everything players hate about this software’s potential effects.
ID verification service IDScan has confirmed that a data breach involved the theft of driver’s licenses from its systems, a week after a report said the identity document checker had been breached during a year-long hack.
The company said in a website notice that hackers stole the driver’s licenses from the company’s cloud; the stolen information includes people’s full names and driver’s license numbers, along with identity numbers from other government-issued documents, such as passports.
The Louisiana-based firm is used by corporate customers from entertainment venues to cannabis dispensaries to check and verify the identity documents of their customers. The notice is the company’s first acknowledgement that it had been hacked. The company said last week that it was investigating an incident, but had not yet confirmed an intrusion.
IDScan said in its notice that it “received information” on or around September 1 about a claim of a hack, on the same day that independent cybersecurity journalist Brian Krebs first reported a data breach at IDScan.
Krebs reported that he was alerted to a website on the dark web that allowed anyone to search the driver’s license information of over 150 million people living in the United States and Canada, including accessing their photos. Krebs verified the authenticity of the data by examining his own record. The database also contained high-profile individuals, including the U.S. Secretary of Defense Pete Hegseth, and a security researcher who also verified his data for Krebs’ report.
The Pentagon told TechCrunch last week that it was aware of the suspected breach, and a spokesperson for the FBI said it was also investigating the incident.
IDScan said on its website its investigation was ongoing. The company’s statement said that, “though full access to the information required payment” — likely referring to a demand for money made by the hackers to access the full cache of stolen data — the company was providing notice on its website to notify potentially affected individuals. IDScan has not said how many individuals are affected but notes on its website that it holds over 150 million driver’s license records.
IDScan did not respond to TechCrunch’s request for comment about the incident, such as whether the hackers contacted the company with a ransom demand not to release the data.
When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.
Truth be told, I’m still not sold on “bullet heaven” as a genre. Name notwithstanding, the genre is certainly here to stay, and there always seems to be funny new takes on it despite the fact that Vampire Survivors did kind of start it off without much room for improvement. While I’m not sure if Wanderburg is an improvement (I haven’t played it yet), I do conceptually like its approach being to hand you a modular medieval castle tank that can suck up sheep and blast cannon fire at your enemies. And it’s out today in early access!
Wanderburg, like its predecessors, is a roguelike, though as I write this I now wonder if that’s a given in the genre, which feels slightly frustrating seeing as neither genre name is particularly prescriptive. You start off with a castle that is also a tank, armed only with a single starting weapon, like a cannon, to defend yourself with. The whole idea is that as you level up, you expand your castle, growing it in size and strength as you do so.
Growth is dependent on a few things. For reasons unbeknownst to me, hoovering up cattle and flocks of sheep can help you do so, but villages fleeing in terror and taking down rival fortresses can do so too. As you level up, you can choose new modules to attach to your mobile castle. That might be new building parts like a barracks that can spawn troops to fight for you, or weaponry like a giant hammer to smash enemies to one side of you. It also looks like you can change up your wheels, with the option of even switching to legs. The movement looks bouncy almost, and I’m fond of the way everything looks like it’s about to topple over at any moment.
As mentioned, Wanderburg is releasing into early access today, so don’t expect a completely finished game. As it stands the core loop is in there, but there are plans to add in more stuff to do and mess around with, as well as make tweaks based on community feedback over the next six to 12 months. If any of what developer Randwerk are putting down takes your fancy, then you pick it up on Steam right now.