Tesla tells Cybertruck owners to ‘use tape’ to fix panel gap issues


The Tesla Cybertruck has never been hailed as the pinnacle of automotive engineering, but even by its own standards, this is a little surprising. A Cybertruck owner recently shared his experience on a Facebook group after bringing his truck to a service center to address a loud wind noise. According to Tesla’s technicians, the solution is to just slap some duct tape over the panel gaps.

Yes, really.

The Cybertruck’s controversial design has already sparked plenty of criticism and has led to several recalls. But recommending DIY tape jobs to fix what appears to be a fundamental build issue? That’s a whole new level of questionable.

A screenshot of the service report reveals the technician’s response: “The noise heard is normal air turbulence expected at higher speeds.” The report also noted that while applying tape helped reduce the sound, further panel adjustments weren’t possible due to the vehicle’s body fitment specifications.

Mashable Light Speed

The owner initially flagged the issue after noticing the loud wind noise, particularly in comparison to a loaner Cybertruck. After investigating, the technician determined that the noise was present in other trucks with similar VINs and concluded that no further action would be taken.

The incident has fueled frustration among Cybertruck owners, with some reporting similar wind noise problems. One owner recounted a test drive where a Tesla technician, wearing a winter hat, was asked to remove it to better diagnose the noise. The technician insisted he could hear just fine, only to later note on the service report that no noise was detected.

Others speculate that the problem could be more pronounced in early production models.

Even with Tesla’s makeshift tape solution, many owners remain dissatisfied with the lack of a proper fix. Tesla did not immediately respond to Mashable’s request for comment.



A Journey Among Shadows Free Download (Build 17470077)


Cosmic A Journey Among Shadows Pre-Installed Worldofpcgames


Cosmic: A Journey Among Shadows Direct Download:

Cosmic, a small creature, is thrust into a shadowless realm teeming with monsters and mysteries. His only hope to return home? Reclaim his lost shadow. But in this dark, dangerous world, there’s a sinister figure who offers protection. Why are there no shadows here, and what secrets does this realm hide? Explore the dark and treacherous Shadowland—a world where shadows hold the key to survival. Forge alliances with bizarre creatures, master new skills, and harness the power of light to battle hordes of demonic enemies. Unravel the mystery of your shadow’s disappearance, and discover the truth behind this strange land. Engage in dynamic combat where agility is key! Fight, dodge, and jump as you chain together devastating attack combos. Harness the power of your ally—the shadow of a mighty beast—to overwhelm your foes. But remember, every shadow requires light to emerge… Chained in the Backrooms

Experience smooth, fast-paced platforming in a richly designed 2.5D metroidvania, packed with intense combat and intricate movement challenges. Inspired by the best of the genre, every step takes you closer to the answers you seek—if you can survive. Explore the dangerous Shadowland, a world divided into four unique realms: the enigmatic Riversoul, the unforgiving Crab Sands, the majestic Jellyfish Kingdom, and the perilous Grim Jungle. Each realm offers distinct challenges and mysteries to uncover as you fight for survival.

Features and System Requirements:

  • Traverse multiple exotic worlds, each with expansive maps filled with puzzles, secrets, and challenges.
  • Unlock new abilities and items to access previously unreachable areas.
  • Collect darkflies, the magical energy source in the Shadowland, to acquire new powers and unlock essential skills, enhancing Vik’s abilities throughout the journey.
  • Encounter formidable monsters requiring diverse tactics and strategic use of unique abilities to overcome, providing challenging and rewarding gameplay experiences.

Screenshots

System Requirements

Recommended
OS: Windows 10 (64bit)
Processor: Intel i5-6600k (4 core 3.5 GHz) or AMD Ryzen 5 2400 G (4 core 3.6 GHz)
Memory: 8 GB RAM
Graphics: NVIDIA GTX 1060 (6 GB) or AMD RX 570 (4 GB)
DirectX: Version 11
Storage: 8 GB available space
Support the game developers by purchasing the game on Steam

Installation Guide

Turn Off Your Antivirus Before Installing Any Game

1 :: Download Game
2 :: Extract Game
3 :: Launch The Game
4 :: Have Fun 🙂

Square Enix announces event for the Nier series’ 15th anniversary, and fans are hoping Nier Automata will finally get a sequel after 8 years



Square Enix is celebrating 15 years of existential crises and hot androids with a special Nier anniversary livestream, featuring appearances from several series veterans, and some fans have their fingers crossed that we’ll finally see a Nier Automata sequel pop up.

The Nier series’ 15th anniversary event will be livestreamed on April 19 at 6pm JST, 9am GMT, and 1am PST – available to watch on YouTube. Square Enix says the stream will include information about upcoming events and merch, a mini concert of the series’ best musical moments, and a discussion between developers. Producer Yosuke Saito, composer Keiichi Okabe, game designer Takahisa Taura, and director Yoko Taro are all confirmed to be in attendance.

40 Best Android Tips to Make Your Phone More Useful


Apple had a headstart in the smartphone era, but Android quickly caught up and is now the most popular computing platform in the world—larger than iOS, of course, but also surpassing Windows and macOS. Android is powerful, but a bit hard to keep up with. Google is always making tweaks and coming up with new features for Android, and OEMs like Samsung and OnePlus can add their own stuff on top of that. So, we’ve gathered the 40 best tips for your Android phone right here.

1. ‘Hey Google’ Voice Match

OK Google setup


Credit: Ryan Whitwam

Google Gemini is at the heart of the newest Android phones, and you can start chatting at any time just by saying, “Hey Google.” This works automatically on the home screen and in the search box, but if you go into the search settings, you can get Hey Google working everywhere. In the search settings, go to Google Assistant (yes, this is still where you’ll find the voice settings in spite of Gemini’s takeover). Just turn on the “Access with Voice Match” option, and the phone will have you say “Hey Google” (but “OK Google” also works) a few times to learn your voice. Now you can use the hotword any time. Some devices also support this when the screen is off, while others only work when the device is awake.

2. AI Photo Editing

Magic Editor


Credit: Ryan Whitwam

The Google Photos app that came preinstalled on your phone can do more than back up your photos. It can also use AI to edit your pics with surprising accuracy, a feature that used to be exclusive to Pixel phones but has since come to all Android devices. Simply choose a photo and tap the editing button. The Magic Editor button lets you select, move, and erase items from the image. The app also includes a Magic Eraser option, which is a quicker way to remove items with generative AI. Finally, you can use the AI Unblur tool to sharpen a photo that turned out blurry.

3. Private Space

private space


Credit: Ryan Whitwam

There are enough apps on Android now that the number doesn’t matter anymore—you can get almost anything. However, you might not want all those apps to be visible to anyone who might handle your phone. Enter Private Space, a feature added in Android 15. On supported devices, the Private Space is available at the very end of the app drawer. Tap the lock icon, verify your identity, and you can access your most sensitive apps. THis is a great place to put banking apps, personal documents, and more. To set this up, you’ll need to take a trip to the Security and Privacy settings, where you’ll find the option to configure Private Space. You will have to log into your Google account again, which will give you access to a private Play Store where you can install apps privately.

4. Chat With Google Gemini

Google Gemini


Credit: Ryan Whitwam

Assistant is yesterday’s news. Google is all-in with the Gemini generative AI assistant. So, if you configured “Hey Google” voice match, it’s probably going to call up Gemini instead of Assistant. You can manually switch back for now, but Google plans to migrate everyone to Gemini eventually. The Gemini chatbot can help with brainstorming and research, and it can even do your homework (but please don’t do this). You can check out the Gemini app for more features, as well as different model options. If you pay for a premium subscription, you’ll be able to choose from Google’s most advanced “Pro” models. Otherwise, one of the “Flash” models will still handle your queries pretty well. You can also use Gemini Live to have a back-and-forth conversation with the robot.

5. Circle to Search

Circle to Search


Credit: Ryan Whitwam

Ever come across something on the internet and have no idea what it is? No problem—that’s exactly what Circle to Search is for. On most newer Android phones, you can long-press on the home button or gesture bar to activate this feature. Simply draw a circle around the object you want to know about, and it will be isolated and fed into Google Lens in a single step.

6. Configure Your Lock Screen

pattern unlock


Credit: Ryan Whitwam

Android phones all offer various forms of secure lock screens. Most phones will prompt you to do this during setup now, and you should. The defaults are PIN, pattern, and password. Most devices now offer fingerprint security, which is probably the fastest way to unlock your device. To control your lock screen, head to the system settings and find the Security menu. Some phones have a separate lock screen menu instead. You will need a secure lock screen to use features like Google Wallet and factory reset protection. You can also customize the lock screen layout and clock style on most phones by long-pressing any place on that screen.

7. Disable/Uninstall Bloatware

Disable app


Credit: Ryan Whitwam

Most phones come with some apps pre-installed that you won’t want to keep around. Luckily, they can be dealt with these days. Some pre-installed bloat can be uninstalled normally by using the Play Store or finding it in the app settings menu. However, anything that’s part of the system image is non-removable. You can disable it by opening the app menu from the main system settings and finding the app in your list. One of the buttons will read “Disable.” Tapping it removes the app from your app drawer and prevents it from running in the background. It’ll still take up a little storage space but won’t accumulate more data.

8. Find Your Phone

Google Find device


Credit: Ryan Whitwam

We have all occasionally lost track of a phone. Maybe it was hiding in the couch cushions or sitting on the kitchen counter. Don’t go crazy looking for your phone next time; just use Google’s “Find my device” tool (previously known as Android Device Manager). You can access this via the web on a mobile device or computer. Simply log into your Google account and choose your missing phone from the drop-down menu. Google reaches out and shows you where it is. You can also ring the phone, even in silent mode. If worse comes to worst, you can remotely erase the phone to protect your data. This same feature also works to locate accessories connected to your phone, like earbuds and smartwatches.

9. Material You Theming

Material You themes


Credit: Ryan Whitwam

Starting in Android 12, Google implemented a revamped interface called Material You. While this colorful, adaptable theme was initially limited to Google’s devices and apps, it was expanded considerably in later Android versions. Most phones now have some Material You flavor, and you should check it out. Material You can change your system theme using a color palette drawn from your wallpaper. It colors icons, widgets, buttons, QS toggles, and more. The degree of theming varies from one device maker to the next. Google’s version is the most elegant and full-featured, but Samsung also leans heavily on Material You. OEMs like Motorola and OnePlus support Material You to a lesser degree.

10. Choose Do Not Disturb Settings

DND settings


Credit: Ryan Whitwam

You can always turn off your ringer, but Do Not Disturb can eliminate distractions. Android’s DND settings are a bit confusing. Not only do OEMs sometimes change the terminology, but the settings themselves are often buried or hidden by default. You’ll find the settings for this feature in your volume pop-up when you hit the toggle or by going into the system Notification settings. In this menu, you can choose when DND is toggled on automatically, what is blocked, and if any contacts can ring through anyway. Do Not Disturb also defaults to hiding your notifications. Make sure to change that setting if you still want to see what’s going on in the notification shade.

11. Digital Wellbeing

Android digital wellbeing


Credit: Ryan Whitwam

Maybe you spend too much time on your phone sometimes, but Android has some tools to help you avoid that. The Digital Wellbeing suite shows you what apps you’ve been using and for how long, and it offers ways to stop that from happening. The settings menu breaks down apps on a chart and lets you set a time limit for apps you want to cut back. The chart tracks notifications and unlocks as well. A “Wind down” mode also slowly fades the screen to grayscale as bedtime approaches.

12. Make Sure Your Photos Back Up Automatically

Google Photos backup


Credit: Ryan Whitwam

There’s nothing worse than losing or breaking a phone only to realize you’ve also lost your digital memories. You can avoid this by opening the Google Photos app and following the prompts to enable auto-backup. The default mode is “original quality,” but you can switch to “high quality,” which compresses your photos slightly to save space. You get 15GB free, and that should be okay for occasional shutterbugs who are light on video and don’t store a lot of data in Drive. If you shoot a lot, you’ll run through that 15GB of account-level storage, but Google will happily sell you more.

13. Try a Different Home Screen

Changing Android home screens


Credit: Ryan Whitwam

Most Android devices have a custom UI created by the device maker (e.g., Samsung One UI). That includes the home screen. This is an important part of the experience, and the default home often isn’t very powerful. Installing an alternative like Nova Launcher or Niagra Launcher can make your device much easier to use. You can use these apps to change the icons, assign navigation gestures, organize apps, and more. Any time you want to switch between your installed home screens, just go to Apps > Default Apps in the system settings.

14. Control Ad Targeting

Ad topics Android


Credit: Ryan Whitwam

Under all the Android, Chrome, and Workspace bits, Google is still an advertising company. It recently debuted the Topics API for ad targeting, which will hopefully be less intrusive than cookies. It’s certainly easier to control. You can head into the system settings and enter the Google submenu to find your Ad Privacy controls. Google builds the topic list based on your activity, but you can remove anything from ad topics you don’t want. There is also a toggle to prevent apps from suggesting topics. You can even block advertisers from tracking the performance of your ads. This system is optional for third-party advertisers, but Google’s products will probably continue using it.

15. Manage Apps on the Web Play Store

Google Play apps


Credit: Ryan Whitwam

Google includes the Play Store client on Android devices, but a version of the Play Store is accessible online. This is a no-brainer for some, but not everyone thinks to use the web-based Play Store. You can do all the same things here that you do on your phone, but faster. Apps and games can be purchased and pushed over the air to Android. You can queue up multiple installs in a fraction of the time it takes on Android. If you’ve got more than one device on your account, you can pick where the app goes.

16. Notification History

Notification history


Credit: Ryan Whitwam

Android makes it so easy to triage your notifications that sometimes you might swipe away something accidentally. If you’ve enabled notification history, you can always find out what that item said. For privacy reasons, this feature is disabled by default. As long as your device is secured with a lock screen option, you should be fine to enable this feature under the Notifications setting menu. Simply head into that menu anytime, and you can see recently dismissed notifications at the top. Below, notifications from the last day are broken up by app. Be aware, this feature is only available in Android 11 and later.

17. Swipe Input on the Keyboard

Gboard swipe input


Credit: Ryan Whitwam

Tapping with your thumbs is okay as an input method, but most keyboard apps have swipe input, too. Give it a shot by dragging across the letters for each word. The accuracy varies by device, but you can install a different keyboard that suits you better. There’s Google’s Gboard, but others prefer something like SwitfKey with its plethora of settings. As long as you’re not making heavy use of non-dictionary words, swipe input will probably be much faster than tapping.

18. Use Power-Saving Modes

Samsung power saving menu


Credit: Ryan Whitwam

All Android phones have power-saving modes of some sort—sometimes two or three. Head to the battery menu to find these settings(just Settings > Battery on most phones, but Samsung hides it under Device Care). For example, Samsung offers a regular power-saving mode that reduces screen brightness and slows the CPU, but you can also toggle on a mode that locks the device to just a few essential applications. There’s always an option to enable power-saving modes automatically when the device reaches a certain battery level. This is definitely something you should set up. Having an hour or two of limited use is better than a dead phone.

19. System Dark Theme

Dark theme


Credit: Ryan Whitwam

Many apps have bright white styles. A system-wide dark theme can toggle those apps and parts of the system UI to a nice, muted black. It’s available in the display settings or, more conveniently, in the quick settings. There are also options to schedule the dark theme, so it flips on automatically every night and off in the morning. Only apps designed in accordance with the latest theme APIs will work, but that’s a surprisingly large number these days.

20. Extra Dim Mode

Extra Dim


Credit: Ryan Whitwam

Smartphone displays have gotten incredibly luminous over the years, reaching thousands of nits of brightness on high-end phones. Less attention has been paid to low brightness. Many phones are still too bright to use comfortably in a dark room, but Android has a solution in the form of Extra Dim. This toggle is under the Accessibility settings, as well as in the quick settings list. When activated, it further steps down your display brightness until deactivated. You can also control the intensity of the dimming effect in the settings.

21. Manage Default Apps

default apps menu


Credit: Ryan Whitwam

Many actions on Android will ask you to set a default app, but what if you decide you don’t like that default anymore? Most phones have a default app settings menu in the application settings, but you can always clear out those defaults by finding your default apps in the main app settings menu. When you look at the info page for an app, there will be an option toward the bottom to view and clear the defaults. That will let you select a new default the next time you perform an action.

22. Configure Emergency SOS

Emrgency SOS settings


Credit: Ryan Whitwam

Since Android 12, Google has placed a Safety and Emergency menu in the system settings. After getting a new phone, you should head into this menu to turn on Emergency SOS. This feature, which calls for help and shares your location with trusted contacts, could be a literal lifesaver. When activating the SOS feature, you’ll choose the appropriate emergency number for your region, trusted contacts, and video recording settings. To activate, simply press the power button five times and then confirm. Your trusted contact will get SMS alerts with your location and notifications when you call emergency services or have a low battery.

23. Rotation Lock Button

rotation lock


Credit: Ryan Whitwam

Rotation lock can be touchy, flipping the screen around when you tilt the phone just a little too far. In Android 9 Pie and later, you can change the rotation setting to lock it in portrait mode but still have access to landscape mode. Start by disabling auto-rotate in the settings. Then, look for the rotation button in the bottom left corner of the screen the next time you turn the phone sideways. Tap that, and it locks into landscape mode until you spin the phone back. Tap the button again, and it’s locked in portrait again.

24. Autofill Service

Android autofill


Credit: Ryan Whitwam

If you’ve got Android, you can avoid typing in passwords every time you log into something. Visit your input settings and open the advanced menu to enable autofill for usernames and passwords. By default, you can enable Google’s autofill service, which is tied to Chrome. Samsung phones will use Samsung Pass out of the box, but you can switch to Google. Third-party apps like LastPass and Dashlane also support this feature. Just tap in a login field in virtually any app, and your autofill client can add the matching username and password.

25. Google Play Family Library

Family Library


Credit: Ryan Whitwam

If someone else in the house has an Android phone, you should consider enabling Family Library in Google Play. This feature lets you share a big chunk of the apps, games, books, and videos you have purchased in Google Play—the store listing will indicate if an item supports Family Sharing. You’ll find the feature in the Play Store under Settings > Family > Sign up for Family Library. You can share the content with another user (or up to five) as long as they’re not part of another family on Google. The settings also let you decide if content is shared with others automatically or if you need to approve each item. Likewise, members of your family can purchase content in the shared account, which you can also control.

26. Screencasting

cast dialog


Credit: Ryan Whitwam

Do you have a Chromecast or Google TV? If so, you can do more than stream video to it. Android devices can mirror the entire display onto your TV, and it’s essentially foolproof. On stock-ish Android devices like Pixels (and a few more), there is a Cast icon in the Quick Settings. Tap that and pick an output device to start mirroring your display. On other phones, just download the Google Home app and use the screencasting feature included there—it’ll appear on the page for any supported Chromecast or smart display.

27. Notification Channels

Notification channels


Credit: Ryan Whitwam

Google has made it easier over the years to reduce notification noise. Apps have notification channels, so you can change how their various alerts appear (and whether they appear). To edit a notification channel, go to the app’s info screen in the settings menu or long-press on a notification and tap the settings gear to see all the associated channels in the settings menu. You can also tap the “Turn off notifications” option instead to get a pop-up with available channels. However you access the channel list, you can turn each channel on or off, change how it appears, and more.

28. AI Wallpapers

AI Wallpapers


Credit: Ryan Whitwam

The value of generative AI, particularly for creating art, is shaky at best. That said, creating wacky phone backgrounds is as good a use as we’ve seen. Android 14 brought an AI background tool, which is currently available on Google and Samsung phones. To access it, head into your Wallpaper and Style menu, and open the wallpaper picker. AI Wallpaper should be right at the top. After choosing a style, the tool gives you a Madlibs-style AI prompt that you can tweak before generating. This feature is expected to come to more phones i the future, but we don’t have any specifics.

29. Customize Quick Settings

Samsung quick settings


Credit: Ryan Whitwam

The quick settings are toggles visible at the top of the notification panel and in the fully expanded quick settings UI. On most devices, you can access them by swiping down twice. Customizing these is something everyone should do when getting a new device, and the process is much more consistent than it used to be. OEMs often add a few more options to Google’s customizable quick settings (like Samsung, above). Just open the quick settings and hit the edit button. Then, long-press and drag to rearrange. The first few settings toggles in the list will be accessible at the top of the notification pane before opening quick settings. App developers can also add tiles that show up in the editing interface. For example, Twitter apps have tiles to start a new Tweet, and VPN apps have on/off toggles.

30. Add a Card to Google Wallet

Google Wallet


Credit: Ryan Whitwam

Google has changed its mind about mobile payments almost as often as it releases new chat apps. Currently, it’s Google Wallet. The app is integrated with almost every Android phone, and it’s quick to set up payments. After entering your card information and confirming your identity, you can hold your phone up to a card reader for contactless payments. To change cards, open the Wallet app from your home screen or the quick settings tile and swipe to the card a different card.

31. Quick Share

Quick Share dialog


Credit: Ryan Whitwam

Quick Share is Google’s answer to the iPhone’s AirDrop, and it works much the same way. Simply share an item or link to “Quick Share” and your device will begin scanning for destinations. It will detect all Android devices logged into your account, but other Android users around you can activate Quick Share to be shown as well. By default, Quick Share only works with contacts, but you can open it up for other nearby connects, too. There’s a settings menu under Connected Devices, as well as a quick settings tile to change that option.

32. Always Show the Taskbar

Android taskbar


Credit: Ryan Whitwam

In the last few years, Google has made some long-overdue improvements to Android for foldables and tablets. These larger devices have a customizable taskbar that appears at the bottom of the screen when switching apps, but you can show it on the screen at all times. The toggle is not easy to find, though. For devices that use the standard Android UI, you can long-press on the divider between the app list and favorite icons. The toggle that appears will let you lock the taskbar in place for quicker access to multitasking.

33. Save Space With App Archiving

App archiving


Credit: Ryan Whitwam

Not all phones are blessed with a terabyte of storage. If you’re running low on space, you can enable App Archiving in the Play Store. In the store, go to Settings > General > Automatically archive apps. When enabled, your device will unload apps when you run low on storage, retaining the icon so you can still access the content. Just tap, and the Play Store will reinstall the app without any additional steps.

34. Lock Screen Widgets

lock screen widgets


Credit: Ryan Whitwam

If you happen to have a newer Android tablet, you might have lock screen widgets. This second attempt at Android widgets on the lock screen is limited to tablets right now. You access these widgets simply by tapping on the lock screen. This reveals a screen of customizable widgets that are visible without unlocking the device. You can long-press to enter editing mode to change the selection.

35. Per-App Language Settings

App languages


Credit: Ryan Whitwam

Android 14 introduced a feature many have long wanted—the option to set different languages for different apps. For multilingual people, this one is really a game changer. To set app languages, head into Settings> System >Languages > App Languages. All your installed apps will be listed here with the system default setting. You can search for specific apps and change the language setting to whatever suits you. The system language and other apps will not be affected.

36. Use (and Remove) Factory Reset Protection

frp dialog


Credit: Ryan Whitwam

Android’s factory reset protection is nice should your phone ever be stolen. The thief won’t be able to reset and log into the phone without knowing your Google password. However, you might also accidentally lock the new owner out of your phone if you sell it. Factory reset protection is enabled automatically when you have a secure lock screen. Ensure you don’t reset your phone less than 24 hours after changing your Google password, or you’ll trigger a 72-hour anti-theft lockout. To disable reset protection for a new user to log into the phone, just turn off the secure lock screen or remove all Google accounts from the device. Enabling OEM unlocking for bootloader access will also turn off reset protection.

37. Sideload (Safe) Apps

unknown apps warning


Credit: Ryan Whitwam

The Play Store has plenty of apps, but if you want to branch out a little, there are safe ways to do that. Some popular sources include F-Droid and APK Mirror. F-Droid is for free and open-source software, and APK Mirror re-hosts free APKs, so you don’t have to wait on staged rollouts and can get old versions of software. To install, simply download the APK and open it. Your device will prompt you to enable “Unknown Sources” and link you to the necessary menu. Toggle that on, and you’ll be able to finish installing. Feel free to remove the Unknown Sources access after you’re done, just to be on the safe side. There will be a scary pop-up (above) when you enable unknown sources. As long as you trust the download, there’s no cause for alarm.

38. Save Offline Maps

maps offline


Credit: Ryan Whitwam

Google Maps includes support for saving maps offline, and while it should download local maps automatically, you can take matters into your own hands. It’s not easy to find the settings, though. First, find the area you want to save offline, then tap in the search bar at the top of the screen. Close the keyboard and scroll to the bottom, and you’ll see the option to download. The app will bring up an outline to indicate the area that will be downloaded and estimate how much space it will take up. The offline data will include streets, points of interest, and the ability to use turn-by-turn navigation.

39. Find My Device Setting

Find My Device


Credit: Ryan Whitwam

Google recently got serious about device finding, going so far as to partner with Apple to ensure users would be able to find location trackers that might be following them around. It also added support for offline device finding to Android. However, the default settings aren’t ideal for actually finding things, as explained above. The Find My Device setting in Android is to only report locations when you are in “high-traffic” areas. That’s supposed to preserve your privacy, but it also limits tracking capabilities. Switching modes ensures you and others will get more up-to-date locations, and all your data is encrypted and anonymous anyway. To change this setting, go to the Security menu and tap on “Find your offline devices.” In this menu, set it to “With network in all areas.”

40. Privacy Dashboard

Privacy dashboard


Credit: Ryan Whitwam

After you’ve set up your phone and used it for a bit, you’ve probably got a raft of new apps begging for your personal data. It’s a good idea to check on your privacy. For the last several versions, Android has had a handy Privacy Dashboard for just this purpose. The location of this feature will vary across phones, but it’s probably something like Settings > Security and Privacy> Privacy > Privacy Dashboard. There, you can see which apps have access to data permissions on your device, as well as which permissions have been access in the last day.

And Much More…

After all of the above, you should be a pro at using Android. This is just the beginning, though. There’s a lot more to discover in Android, and every device is a little different. So, don’t be afraid to poke around in the deep, dark corners of the settings and see what you can find.

My Wife Doesn’t Help Me


“My wife is always spending time with her friends and outside family, she’s not doing what she’s supposed to. If she helped me more, I wouldn’t have to work so hard. What do I do?”

Ouch, that’s tough. I’m so sorry you’re dealing with that.

The first thing I would say is that you can’t change someone else. You can’t make her want to work or even to help you. It really has to be her heart.

I would say though that she’s literally not being who she was created to be. Women were created for man. We were created to help our husbands. That’s literally our job in life. To help him, to support him, to make him not lonely and to be with him. If she’s not helping you, she’s in clear sin and not lining up to who she was designed to be. Genesis 2:18, 1 Corinthians 11:3, 1 Corinthians 11:8-9.

Secondly, are your expectations too high? Most likely they are not, but it’s always a good idea to check. If you expect her to take care of the kids, keep a clean home, AND work 80 hours a week for example, it’s just not realistic.

However, if she’s doing a lot of petty things, things that don’t matter for eternity, or spending all her time on the kids and ignoring your needs, then it’s a good idea to have a conversation with her and tell her how you feel.

Be honest, be sincere, be tender.

Show her how you don’t believe she’s lining up to the Proverbs 31 woman. Ask her if she’s willing to change this. 

Then, all you can do is make it a matter of consistent prayer until something changes.

Leave it to God, she answers to Him, and God WILL chastise her if she’s a believer if she’s not taking your requests (anything that is not sin) seriously. He WILL work in the situation. Talk to her honestly and leave it in His hands until He changes things, but keep praying!!

The 20 Best Barefoot Shoes for Running or Walking (2025)


How to Get Started With Barefoot Shoes

Closeup of a person's feet wearing barefoot shoes outside

Photograph: Masudnpathan/Getty Images

You’ve probably been wearing padded shoes most of your life. Don’t expect to toss them and be able to do the same mileage—whether walking or running—in barefoot shoes. To a certain degree, you must relearn how to run and walk. It’s going to take a conscious effort on your part, and it can be very difficult. You’re not just learning, you’re also unlearning some ingrained habits. The key is to go slow. Very, very, absurdly slow.

How you approach barefoot shoes depends on what you’re looking to do. I happened to be getting into running, which worked out nicely because I had to take it slow (I sucked). If you’re currently an ultra-marathoner and want to try barefoot shoes, you’ll have a hard time holding yourself back. If you’re somewhere between those poles, it’ll still be hard not to overdo it. Focus the discipline you usually use for distance into not doing distance.

If you don’t know where to start, check out Graham Tuttle’s YouTube channel, especially his foot strengthening exercises. These will help you develop the foot and ankle strength you lack if you’re coming from years of padded shoes, and help reduce muscle soreness when you’re getting started in barefoot running. Tuttle also offers some paid programs aimed at giving you a more personalized guide (I have not tried any of these). Another YouTube channel I’ve found helpful is the MovNat channel, which isn’t barefoot-specific but has plenty of good barefoot advice sprinkled throughout its content. And if you haven’t read Christopher McDougall, both Born to Run and Natural Born Heroes are fun barefoot-related reads. Indeed, Born to Run arguably did more to popularize barefoot running than anything else since the padded shoe was born in the early 1970s.

It’s also worth saying that barefoot shoes are not a zero-sum game. For over a year I wore barefoot shoes running, regular shoes for other tasks, and sandals the rest of the time. It’s not all or nothing. If you go on a barefoot run and then slap on your favorite Converse right after, that’s OK. It’s equally important to know that everyone is different. It took me six months to fully transition to barefoot shoes. But that’s just me. It might take you two months or two years. Go at your own pace, and don’t worry about the experiences of others.

Wordle today: Answer and hint #1346 for February 24


Give your daily Wordle the best possible start with our helpful range of tips and tricks, designed to improve every guess you make. And if you need something more, our hint for the February 24 (1346) Wordle’s ready and waiting to go, with today’s answer just a click away if you need to see today’s winning word right now.

My opening row was a perfect combination of green letters in key places and a helpful yellow to find a slot for. Even the greys were useful, quickly focusing my attention and ruling out hundreds of words. I really thought I had this one in two guesses. Instead, I had to make do with three. Still, not a bad way to start my Wordle week.

Today’s Wordle hint

(Image credit: Josh Wardle)

Wordle today: A hint for Monday, February 24

How to Cut Costs in 3D Product Rendering: Tips for Freelance Designers & CAD Firms


A lot of expert 3D rendering projects have similar requirements: create 3D models, apply textures and colors, rendering happens, have some final touch-ups done, and deliver the image. The basic workflow is almost exactly the same regardless of the project, but there can be plenty of different details in each step depending on what the client needs.

Take exterior rendering, for example; one client wants to have a complete aerial view, while another only needs a plain white background. Both projects result in a photorealistic visualization of an exterior, but the latter should be more affordable and quicker because it involves much less work on your part.

Cad Crowd has experience with working with a wide range of projects – big and small – and we understand what it means to find the best balance between quality, budget, and timeline. Let’s take a look at some strategies you can use and how outsourcing 3D rendering projects can give you the boost you need.


🚀 Table of contents


Cut rendering costs

3d product rendering design examples

RELATED: How are product concept design services used to innovate during product development?

Whether or not you realize it, there are plenty of opportunities to save money (along with time and energy) in every project. No matter the objectives, chances are you can implement these cost-saving strategies for yourself and your clients.

Define the project outline and strategy ahead of time

The main idea behind having a clear project outline is to avoid doing unnecessary work. You’ll find that taking just enough time (at the beginning of the project) to craft a detailed plan can save you from getting a lot of headaches in the days to come. The outline keeps your workflow organized and streamlined. Furthermore, it helps you realize some project requirements that might not be clearly apparent.

Example: you’re working for a client who wants a complete set of 3D visualizations services for a product page. The client specifies that the set should include multiple static renderings and an interactive product viewer. If the static renderings include six images (viewed from the front, back, right side, left side, top, and bottom), it seems like you only need to stitch them together for the viewer. As you create the project outline, you come to realize that the product viewer must use full rotation, so the object can be seen from just about every angle, including the corners. Thanks to the outline, you can now manage the workload better; as in, you can plan for the viewer while working on the static renderings. A more manageable workload means quicker completion time and an overall better cost-efficiency.

RELATED: 3D product rendering company or 3D artist: How to hire for new product designs?

Make a list of everything required for the final image

Think about the image format, resolution, and viewing angles for the final image. Having a clear vision of the final image can help you identify potential cost-saving strategies during the modeling, texturing, and UV mapping works. Let’s say a client wants to have some close-up shots of a furniture product. This means you need to get all the details right with the materials, carvings, wood grain, fabrics, and even nailheads. All of those require extra work during the modeling process. If the client has no need for close-up shots, you can spend less time creating details on the 3D models. And at the end of the day, the rendering should cost less money as well.

Example: a product visualization project needs several renderings to showcase the object in different color variations. Each of them needs to show the object in a specific combination of finishes and colors. The client mentions that the final images will be placed in the corner of the scene, so they’re pretty far away from the camera position. Since there are no close-ups to focus on the finer details of the object, you can afford to create fewer texture maps and spend less time on modeling virtual materials. Furthermore, the lack of close-up views allows you to use a “medium” quality render setting – as opposed to an optimum one – to save time and cost, without sacrificing quality.

Work on similar tasks first

Now that you’ve defined the project outline and listed everything you need for the final images, it’s time to group similar tasks based on their categories. When you’re working with a 3D rendering service from scratch, you have no option but to shift to different mindsets as you go through the workflow stages. The most common groupings would look like this: 3D modeling, UV mapping and texturing, rendering, and post-processing.

You’re not focusing on textures when you build the 3D models, and you couldn’t care less about lighting when applying textures. You may have to switch between software packages as you progress, so the grouping helps you stay focused on the immediate tasks at hand. This forces you to actually complete a big portion of the job before moving to another. Grouping similar tasks brings about the sense of accessible workflow, preventing you from wasting too much time going back and forth between different phases of the project.

Example: let’s just say you’re hired to do a rendering project for a brand-new product. The client’s marketing team wants you to deliver a dozen renderings. Half of them are based on different prototype models, and the other half are reserved for the final production version. The first phase has to go through a rather cumbersome and lengthy process of submission, refinements, revisions, and approvals for each model. The client ends up paying $50 per render, mostly due to the modeling complexities. Now that the final version is ready, you need to deliver the remaining six images. But since these renderings are all based on the same model, your workflow is more manageable as you can group similar tasks together for all images. The project is much more time-efficient now, and the client ends up paying $35 per render.

RELATED: 3D rendering: What it is and why you should care

Take the 90% rule as a guideline

No matter what software you use, the hard truth is that 3D rendering can’t reach perfect lifelike quality in many cases, especially for large architectural objects or natural sceneries even for large architectural firms; it’s always either lacking or over-the-top. It might not be a problem for small objects like a tree, a rock, a glass of milk, a smartphone, etc. But when all those objects are put together in the same frame, complexities arise in terms of lighting, shadows, perspectives, reflections, and so forth. At some point in your rendering workflow, the amount of time and effort you put into the imagery becomes no longer effective. It’s as if you’re trying to improve something that’s already as good as it’ll ever be.

You might as well stop just as soon as you reach the 90% photo-realism mark. Any attempt to improve the rendering beyond that point will probably take a much larger investment no client is willing to consider. Unless you’re working as a CGI professional on the next Hollywood blockbuster, no one really cares if the fabrics in the upholstery don’t shine as much as they should.

Example: it’s not a secret that cloth is a challenging material to render. It has a depth of texture quality and comes with subtle reflective properties. In a close-up rendering, most artists will focus on the stitching and seam lines to create easily noticeable focal points and distract the audience from the tiny imperfections. You should be able to deliver a 90% realism for around $200; to get the next 10%, however, you might have to charge the client 5x higher, because you need to work 5x as hard to achieve it. For practical purposes, the additional 10% isn’t worth the extra investment. It takes away a big chunk of the work on your part, and helps the client save money.

3d product rendering of an advanced heli-like drone and a workout machine

Make use of CGI library

Most expert 3D modelers and render artists are paid on an hourly basis. If you can finish the job sooner than expected, the client gets more affordable prices, and you can move on to the next project quickly as well. One of the most time-consuming tasks in a 3D rendering workflow is the modeling part, especially if you have to build the model from scratch. But this isn’t always the case. When the circumstances allow, you can use (purchase) ready-made models from 3D assets marketplaces at affordable rates. Of course, you still have to modify them to make unique pieces. Modeling might take you 3–4 days for a relatively simple object, but purchasing a low-quality model and then improving it to good quality can cut the workload to a great deal.

Example: a new client asks you to build a rendering of a kitchen. The final image must include all the appliances, lighting, fixtures, a countertop, a cutlery set, and so forth. It should come as no surprise that there are hundreds if not thousands of 3D assets out there for all the things typically found in a kitchen. If you have to create every model, from knives and glasses to cabinetry and appliances, it’ll take at least a week just to get the first phase of the project done. 3D assets marketplaces have all the models ready for you. Some are high quality, while others are barely passable; each is priced accordingly. Pick a good balance between cost and quality so you don’t have to spend too much time on improving it, yet you still come up with 3D models of respectable quality. Some marketplaces even sell ready-made 3D scenes.

RELATED: Photorealistic rendering services: complete price, cost, rates and fees for companies and firms

But how is it made?

While no two CGI renderings are exactly the same, the workflow almost always goes along the same steps.

Gain through understanding of the brief: an effective way to ensure time efficiency (and also reduce production cost) is to learn all the information provided by the client in detail. This is where you can properly estimate how complex the project will be and how long it will take to finish everything. Accordingly, you’ll be able to determine how much to charge the client because a more intricate project costs more money.

Create the geometry: whether you’re making a CGI for a small desk or an entire residential area, you need the 3D modeling services first. You build a grayscale model (sometimes also referred to as a clay model). Your focus should be on dimension, shape, and proportion. Everything else, including textures and colors, are not the main concerns here. Grayscale models are your first deliverables. You present the “textureless and colorless” models to the client for approval before moving forward to the next phase. Ideally, you build several models to showcase the object from different viewing angles. If the client wants revisions, you make the required changes and resubmit the models until the client gives the green light to proceed.

Every revision means a delay in completion. Not to mention, you need to spend more time working on the same models twice or more. The good thing is that you can minimize the possibility of having to revise the model multiple times by, once again, gaining a good understanding of the project brief in the first place.

Apply textures and colors: now that the grayscale models are approved, it’s time to apply textures and colors. But you can’t just slap some assets onto the surface of the models. You need to do some UV mapping first. Basically, you divide the surface (of the model) into multiple elements; each element must be “unwrapped” or transformed into a flat plane. And then, you apply the textures or materials and colors as needed. Doing it on a flat plane makes sure that the surfaces are laid evenly so you get realistic-looking patterns.

Add lighting: the whole point of rendering is to make a computer-generated image as realistic as possible. To do that, of course, you need to add some lighting as well. This doesn’t necessarily mean you need to paint lights and shadows on the image. Instead, the rendering software usually offers various settings for light directions, angles, sources (natural or artificial), and intensity. Remember that some materials and surfaces interact with light in their own distinctive ways. For example, glass is translucent, so it refracts and reflects a certain amount of light. Solid objects with shiny surfaces, such as polished metals or wood, can have reflective characteristics to an extent as well.

Render the image: once the models are ready and the lighting is configured, the actual rendering begins. It’s a fully-automated process with minimum user input. Rendering software can create a single static image or a series of images in rapid succession to create the illusion of motion.

Post-production: The rendering process can take anywhere from just a few minutes for a simple image or many hours for a complex one. When the rendering is done, the only thing left to do is to enhance the visuals through post-processing services. Compared to modeling, post-processing involves relatively simple tasks like adjusting the contrast, hue, saturation, etc. The idea is to make the image look vibrant without losing its photo-realism effect.

3D photorealistic rendering services itself comes with several different methods, such as real-time and ray-tracing, and each can affect the final image quality.

Cad Crowd can help

There are many aspects of a 3D rendering project where you can improve cost-efficiency without sacrificing quality. Just because you provide rendering services at affordable rates, it doesn’t necessarily mean you deliver poorly executed visualizations. Reducing cost isn’t always about cutting corners, but making the most of every penny. And if you’re a client looking for quality 3D rendering services, look no further than Cad Crowd, where thousands of independent, talented, professional render artists offer custom services for every budget.

Give Cad Crowd a call today to get your free quote.

author avatar

MacKenzie Brown is the founder and CEO of Cad Crowd. With over 18 years of experience in launching and scaling platforms specializing in CAD services, product design, manufacturing, hardware, and software development, MacKenzie is a recognized authority in the engineering industry. Under his leadership, Cad Crowd serves esteemed clients like NASA, JPL, the U.S. Navy, and Fortune 500 companies, empowering innovators with access to high-quality design and engineering talent.

Connect with me: LinkedIn ✦ X ✦ Cad Crowd

Apple reportedly plans to combine its modem with future processors as a single package


Apple introduced its first in-house cellular modem, the C1, last week with the announcement of , and while it didn’t get into too much detail about it, the company reportedly has some big plans for future iterations. According to ’s Mark Gurman, “Apple intends to eventually meld the modem component into the main processor.” Integrating the modem into the main processor could have energy and cost benefits, but that design is still a ways off. We’ll likely see the C2 and C3 without it first, which the company is already testing according to Gurman, and the integrated design won’t follow until “2028 at the earliest

During its unveiling, Apple called the new C1 modem its “most power-efficient modem ever in an iPhone.” The $599 iPhone 16e also has an A18 chip (but with four GPU cores) and supports Apple Intelligence, even if that’s not .

c# – Unable to get Central Package Management (CPM) to work as expected


Just in the process of converting our legacy application (.NET 4.8) to use Central Package Management instead of the individual packages.json files.

I used the .NET Upgrade Assistant for most of the heavy lifting.

Everything appears to have worked correctly. I see the Directory.Packages.props has been generated in the root (same directory as the solution) of the repository.

All projects (.csproj) now have the their correct PackageReference‘s, e.g.,

<ItemGroup>
    <PackageReference Include="System.ValueTuple" />
</ItemGroup>

The generated Directory.Packages.props has the following structure:

<Project>
  <PropertyGroup>
    <ManagePackageVersionsCentrally>true</ManagePackageVersionsCentrally>
    <CentralPackageTransitivePinningEnabled>true</CentralPackageTransitivePinningEnabled>
  </PropertyGroup>
  </ItemGroup>
    <PackageVersion Include="System.ValueTuple" Version="4.5.0" />
    ...Many other package versions
  </ItemGroup>
</Project>

Problem

Anytime I add a new Nuget package in Visual Studio via VS Package Manager UI, that package is not being added to the Directory.Packages.props file. Furthermore the individual PackageReference added to the project (.csproj) contain a version.

<PackageReference Include="Humanizer">
    <Version>2.14.1</Version>
</PackageReference>

I’m unsure why this new package is not being added to the Directory.Packages.props file and I also don’t understand why the package is being added to the .csproj with a version.

I’m using Visual Studio 2022 Enterprise v17.11.2.