The Pixel 10 Pro XL isn’t giving most of you issues, poll finds


google pixelsnap pixel 10 pro xl case 5

Rita El Khoury / Android Authority

It feels like we can’t go more than a few days without hearing about some new problem Pixel phones are having; judging by user reports online, you’d think Google’s hardware is barely functional. But a lot of us use Pixel phones every day without incident, which makes it hard to gauge how widespread issues that crop up in places like Reddit really are.

In a poll running on Android Authority for the past couple of weeks, we asked readers about their experience with Google’s latest Pixel 10 Pro XL. Thousands of people responded — and it turns out that most of them haven’t had any significant problems with the phone. “There’s always background noise with Pixels,” our own Stephen Radochia wrote about his months-long experience using the Pixel 10 Pro XL, “but most of it is overblown.”

As Stephen tells it, though, he hasn’t had any real issues with the 10 Pro XL to speak of. Nearly 6,000 people responded to a survey running in his write-up, with more than 70% saying their experience lines up with Stephen’s: 4,110 respondents indicated that their experience with the Pixel 10 Pro XL has been “excellent.”

That leaves about 29% of respondents that have had real issues with the Pixel 10 Pro XL (the survey response specifically called out overheating, bugs, and poor performance). That’s nearly a third of a fairly large sample size, but it’s still hard to say what 1,700 people indicating they’ve had some combination of issues with a mass-market product really means for average users.

I haven’t used a Pixel 10 Pro XL at all, personally, but I’ve been using a Pixel 9 Pro for almost two years now, and I haven’t had any serious issues with it. I’ve had similar experiences with several prior models, too — but maybe I’m just lucky.

Have you had a good run with Pixel phones? Do you think online discourse over Pixel issues has gotten out of hand? Tell us about it in the comments.

Thank you for being part of our community. Read our Comment Policy before posting.

I’m officially obsolete because this robot can operate an Xbox controller, open unhealthy snacks, and make clumsy sexual passes


What am I even on this planet for, really? To play videogames? To partake in an unhealthy diet? To make awkward sexual passes at the consenting partner of my choice? All of the above.

I might as well dig my own grave and climb into it because there’s a robot on the brink of accomplishing all of those important tasks in my place. As a human, I’m officially obsolete because the NEO Home Robot can use an Xbox controller, open a bag of Funyuns, and slowly, awkwardly remove someone’s clothing. Well, I had a good run. Goodbye, everyone.

Best AutoCAD Alternative for Onshape Users: Why Choose ARES Kudo or ARES Commander


As cloud-native CAD adoption continues to grow, Onshape users are increasingly looking for modern alternatives to AutoCAD for their DWG editing and drafting needs. To fill this need, more and more engineers are choosing ARES CAD software from Graebert.

But when evaluating ARES as an AutoCAD replacement, Onshape users may encounter a few common misconceptions. This article explains the differences between ARES Kudo, ARES Commander, and Onshape Drawings, and helps you determine which solution is the best fit for your workflow.

How Onshape Users Benefit from a Professional DWG CAD Solution Like ARES

Onshape includes the Onshape Drawings module, which is powered by ARES Kudo technology. This sometimes leads users to assume that ARES products are simply an extension of Onshape Drawings — but they are not. Let’s take a look at the fundamental differences.

The primary purpose of Onshape Drawings is to create and annotate 2D views that remain linked to the 3D Onshape model. When the model changes, the drawings created from it can be updated automatically. ARES products serve a different purpose: they provide full DWG editing capabilities.

When working in ARES, you can edit native DWG files with a complete set of CAD drafting tools. However, the DWG file is independent from the Onshape model. Unlike in Onshape Drawings, there is no automatic association between a DWG file in ARES and the original Onshape design.

This distinction is important, because some users expect drawings in ARES to maintain a live connection to the Onshape model. In reality, you gain the power of professional DWG editing tools, but work outside of Onshape’s associative drawing environment.

ARES Kudo: The Natural Choice for Browser-Based Users

For many Onshape users, ARES Kudo is the first ARES product they discover, because it is available directly through the Onshape App Store. ARES Kudo is a cloud-based DWG editor that runs entirely in a web browser, making it a natural fit for engineers and designers who already work primarily in Onshape. If your DWG editing needs are only moderately frequent and you prefer a fully browser-based workflow, ARES Kudo may be all you need.

Many users choose ARES Kudo because it offers:

  • Professional DWG editing directly in the browser
  • No software installation 
  • Integration with many cloud storage platforms
  • Familiar workflows for users already accustomed to cloud-native applications.

For users who frequently work outside the office environment, Graebert also offers ARES Kudo Professional, which includes ARES Touch for smartphones and tablets. While ARES Kudo can be accessed from a mobile browser, it is not tailored for use on small screens. ARES Touch is custom-built for use on iOS and Android devices, and it provides several advantages:

  • Native mobile application experience
  • Optimized touch interface
  • Online and offline access
  • Better performance on tablets and smartphones.

The Full AutoCAD Alternative for Onshape Users: ARES Commander

One of the biggest misconceptions among Onshape users is that ARES Kudo is always the best replacement for AutoCAD. For many AutoCAD users, especially those working with the full version of AutoCAD, ARES Commander is actually the better choice — and it costs only a little more than ARES Kudo.

ARES Kudo offers functionality comparable to AutoCAD LT. It is intended for general DWG editing and drafting. ARES Commander, on the other hand, is a desktop application designed for professional CAD users who need:

  • Advanced 2D drafting capabilities
  • Better performance on large and complex drawings
  • Enhanced customization options
  • 3D solid modeling
  • STEP import and export
  • Professional CAD productivity tools.

For organizations replacing the full version of AutoCAD, ARES Commander provides a smoother transition than ARES Kudo, because its feature set is much closer to what experienced AutoCAD users expect.

In addition to a familiar interface, native DWG compatibility, and the professional tools that CAD teams require, ARES Commander offers another important benefit: It remains significantly more affordable than AutoCAD.

Importing Onshape STEP Files into ARES Commander

Another powerful advantage of ARES Commander is its support for STEP files and 3D solids. An Onshape model can be exported as a STEP file and imported into ARES Commander, where it becomes a 3D solid model.

This enables workflows such as:

  • Creating section views
  • Generating detailed manufacturing drawings
  • Producing flattened views
  • Preparing documentation based on imported geometry.

However, it’s important to understand that the model in ARES Commander is not linked to the original model in Onshape. Any changes made in Onshape would require a new export and import process.

How to Work with DWG Files Stored in Onshape Using ARES?

Both ARES Kudo and ARES Commander can work with DWG files stored in Onshape. ARES Commander includes a Cloud Storage palette that allows users to connect directly to supported cloud platforms, browse project files, and work on local cached copies while maintaining synchronization with the cloud source. When connected to Onshape storage, users can open, edit, and save DWG files while keeping them stored within the Onshape environment.

However, there is one important requirement that organizations may overlook when planning their deployment: To access and edit DWG files stored in Onshape, the ARES user must also have an Onshape subscription.

This works perfectly when the same person uses both Onshape and ARES. For example:

  • Mechanical engineers design parts in Onshape
  • The same engineers create or edit DWG files in ARES.

In this scenario, integration is seamless. However, many companies have separate teams for these parts of the workflow. For example:

  • Product designers working in Onshape, and
  • Drafters working in AutoCAD (or ARES).

If the drafting team only needs access to DWG files and does not use Onshape for design work, purchasing an Onshape subscription for every DWG editor may not be cost-effective.

Using Shared Cloud Storage for DWG Collaboration Between ARES and Onshape
Using Shared Cloud Storage for DWG Collaboration Between ARES and Onshape 

For teams that allocate design and drafting responsibilities to different users, a more practical workflow is often to use cloud storage as the collaboration hub. ARES products integrate with major cloud platforms including:

  • Microsoft OneDrive
  • Microsoft SharePoint
  • Google Drive
  • Dropbox
  • Box

In this workflow:

  1. The CAD team creates and edits DWG files using ARES.
  2. Files are managed through shared cloud storage.
  3. Whenever a design reaches an approved milestone, an Onshape user uploads the validated DWG version into Onshape as part of the official project documentation.

This approach helps companies save money by avoiding unnecessary Onshape subscriptions, while maintaining collaboration between design and drafting teams.

Comparing ARES Kudo and ARES Commander: Which is Best for Onshape Users?

For most Onshape users evaluating an AutoCAD replacement, the decision comes down to how the alternative solutions work.

Choose ARES Kudo if:

  • You prefer a browser-based workflow.
  • You need DWG editing capabilities occasionally.
  • Your drafting requirements are similar to AutoCAD LT.
  • You want to stay entirely in the cloud.

Choose ARES Commander if:

  • You are replacing the full version of AutoCAD.
  • You need DWG editing capabilities frequently.
  • You work with large or complex drawings.
  • You need advanced CAD features.
  • You require STEP import/export and 3D solid modeling.
  • You want the smoothest transition from AutoCAD.

Replace AutoCAD in Your Onshape Workflow with ARES

As engineering teams move toward cloud-native design platforms like Onshape, they also need modern DWG tools that fit into these workflows.

Whether you choose ARES Kudo for browser-based drafting that replaces AutoCAD LT, or ARES Commander as a full AutoCAD replacement, rest assured that both solutions provide professional CAD capabilities and native DWG compatibility — while offering significantly more flexibility and value for modern CAD teams.

To learn more about how ARES can complement your existing workflows, watch our Deep Dive on Modern CAD in DWG & Cloud-Based Collaboration.

CTA Button: Try ARES Commander and ARES Kudo today

The devil works hard but AI ripoffs work harder as Meccha Chameleon falls victim to hordes of copycats coming out of the woodwork


It’s an unfortunate rite of passage nowadays for popular indie games to have their concept taken from them by ripoffs that are devoid of any real creativity. The latest casualty? Meccha Chameleon, which has now been pilferred by copycats across Steam, Fortnite, and Roblox.

The most egregious example, and the one that brought this to my attention (thanks GamesRadar), is Scribble Hunt, a game where you “paint the bunny man—a hide-and-seek where you blend in like a chameleon”—very subtle.

OpenAI researcher Miles Wang in talks to launch AI drug discovery startup valued at $2B


Miles Wang, an OpenAI researcher whose work includes using AI to accelerate scientific and biological discovery, is leaving the ChatGPT maker to launch a new startup focused on developing AI models for drug discovery, according to four people with knowledge of his plans. Several other OpenAI researchers are expected to join the new company.  

Wang is in talks to raise about $200 million at a $2 billion valuation, two of the people said. Lightspeed is in discussions to lead the funding round, according to sources. Talks are ongoing, the deal may not be final and details could change.

Wang disputed the story’s funding figures and description of the company but did not specify the correct numbers or details. Lightspeed didn’t respond to a request for comment.

The funding discussions point to investor interest in applying AI to make breakthroughs in life sciences. Chai Discovery, a two-year-old startup developing AI models that can predict molecular interactions to identify new drugs, announced on Tuesday that it raised $400 million at a $3.8 billion valuation. (Co-founder Josh Meier also passed through OpenAI as a researcher.) Meanwhile, Google DeepMind spinout Isomorphic Labs, which also develops AI models for drug discovery, raised a $2.1 billion Series B in May.

Wang’s new startup may be working on AI models that will help find new uses for existing drugs and possibly those that previously failed in trials, a couple of sources told TechCrunch. Finding new uses for FDA-approved drugs can result in significantly faster time to revenue than developing new drugs from scratch, as these medicines have already been tested for safety.

Wang joined OpenAI in 2024 after dropping out from Harvard, where he was working on a bachelor’s degree in computer science. (In recent years, investors are once again comfortable betting on young founders who haven’t completed college.)

At OpenAI, he co-authored research papers, including evaluating how AI models can automate and accelerate scientific discovery.

When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.

Layoffs might offer “better short-term financial results,” late Nintendo president Satoru Iwata admitted in 2013, but “employees who fear that they may be laid off” will never produce the same results


Satoru Iwata was already a legend in the gaming community while he served as Nintendo president, and that legacy has only grown since his untimely death in 2015. He led the company through the highs of the Wii and DS era, but it’s his actions through the financial lows of the Wii U and 3DS generation that are perhaps best remembered these days. Game developers are now subjected to the constant threat of mass layoffs at major publishers, but Iwata took a different approach.

Iwata famously slashed his own salary by 50% in 2011, in response to poor financial results following the launch of the 3DS. Other executives at Nintendo took smaller pay cuts as well, but the company did not lay off employees even during a period of three back-to-back years of operating losses as both the 3DS and Wii U failed to gain ground.

Inside the Engineering Behind Panasonic PTZ Cameras


Every Panasonic PTZ camera begins with a commitment to precision engineering and quality craftsmanship. Designed, engineered, and manufactured in Japan, these cameras are built through a meticulous development process that emphasizes reliability, performance, and long-term durability.

A behind-the-scenes look at Panasonic’s manufacturing process showcases the people, technology, and attention to detail that help deliver the image quality and dependable operation trusted by broadcasters, educators, houses of worship, and content creators around the world.

Learn more about Panasonic here

Read the original post here

Built-in Agent Skills Bring .NET and Azure Expertise into Visual Studio


Visual Studio now includes built-in Agent Skills, created by experts from the .NET and Azure teams, to help you better customize your agentic workflow and complete development tasks more efficiently, starting with the 18.8 Release. Agent Skills are reusable capabilities that enable your agent to perform structured tasks more reliably (to learn more about what are Agent Skills, see this previous post).

We’ve heard that getting started with skills can feel unclear, especially when deciding which ones to use and how to apply them. To simplify this experience, we’ve introduced a set of built-in skills for common .NET and Azure scenarios, so you can immediately benefit from them in your workflow.

You can find these skills in the Built-in category in the tool picker. Hover over each skill to view its description and path, or use the three-dot menu to open the full skill or its folder location. These skills will only appear when the corresponding .NET and Azure development workloads are installed in Visual Studio.

From tool picker pop up, showing the Skills tab which includes a built-in category of skills. The cursor is hovered over the "azure-ai" skill which displays a tool tip that includes the description and path of this skill.

Currently, built-in skills are off by default, so you can review and enable only the ones that suit your tasks. We are actively evaluating the effectiveness and cost of enabling these skills by default. As we transition into the new usage-based billing model for Copilot, we want to make sure every token you spend is meaningful and are tracking efficacy through a dashboard. We will turn on the skills when we find evidence that these skills would improve your agent performance.

A chart displaying the evaluation result of dotnet-webapi skill.

If you want to learn more about Agent skills and built-in skills in Visual Studio through live demos, please watch our VS Live Toolbox show featuring this topic!

.NET Skills

The dotnet/skills provides skills that help agents be more successful no matter what type of .NET app you are working to develop, taking you from scaffolding new applications to adding new features, to diagnosing issues with existing applications, whether you are working in ASP.NET Core or MAUI or developing AI-based applications.

Included with Visual Studio, we are first providing you with dotnet-webapi and analyzing-dotnet-performance.

1. Get more from your API development

When you are working with ASP.NET Core HTTP APIs, the dotnet-webapi skill guides creation and modification of endpoints with correct HTTP semantics, OpenAPI metadata, and error handling. This helps you get clean, modern .NET code from the agent on the first pass.

Try it: “Add an endpoint to the API to handle moving the entries from current to archived. Include proper error handling.”

2. Review the performance of your application

For every .NET developer, performance of the application you’re building is extremely important. With the analyziing-dotnet-performance skill, agents can more easily scan .NET code for ~50 performance anti-patterns across async, memory, strings, collections, LINQ, regex, serialization, and I/O with tiered severity classification.

Try it: “Review this application for performance optimization opportunities and provide me with the top 3 changes I should make for the biggest improvement.”

Azure Skills to Try First

The Azure skills covers the whole journey of getting an app onto Azure—from scaffolding infrastructure to securing, analyzing, and extending it with AI. If you’re not sure where to start, here are a few built-in skills that fit naturally into a Visual Studio developer’s workflow. Each one packages real Azure expertise—workflows, decision trees, and guardrails—so your agent does genuine Azure work instead of handing back generic cloud advice.

1. Go from app to deployed: azure-prepare → azure-validate → azure-deploy

These three skills form one deployment chain that hands off automatically:

  • azure-prepare generates the infrastructure your app needs—Bicep or Terraform, azure.yaml, Dockerfiles, and managed identity.
  • azure-validate runs preflight checks before anything deploys—configuration, Bicep/Terraform, RBAC and managed identity permissions, and a what-if/build verification—so problems surface before they hit Azure.
  • azure-deploy executes the deployment (azd up, azd deploy, Bicep, or terraform apply) with built-in error recovery instead of leaving you stuck on a cryptic message.

The result: a single path from “it builds locally” to “it’s running in the cloud.”

Try it: “Deploy my ASP.NET Core app to Azure Container Apps with managed identity.”

2. Analyze logs and telemetry with azure-kusto

Once your app is live, query its data in Azure Data Explorer (Kusto/ADX) with KQL for log analytics, telemetry, and time-series analysis. Describe what you want in plain language and let the agent write and run the query—the fast way to answer “what happened, when, and how often.”

Try it: “Query my logs for the error rate per endpoint over the last 24 hours and show the spikes.”

3. Build and ship AI features with microsoft-foundry

Adding AI to your app? This skill takes you end-to-end with Microsoft Foundry: discover and deploy models, create and invoke agents, run evaluations, and fine-tune—removing the guesswork around which model fits, how to deploy it, and how to wire up an agent.

Try it: “Deploy my hosted agent to Foundry.”

We hope these built-in skills could further improve your agentic workflow. Please give them a try, and let us know if they were helpful for your workflow. Also let us know what additional built-in skills you would like to see, or how we can future support your agentic workflow in Visual Studio!

Lorde says AI glasses are “not sexy”


While Kylie Jenner serves as a human billboard for Meta’s AI glasses, pop star Lorde isn’t buying it.

During a set at the Mad Cool Festival in Madrid last week, Lorde had some choice words about the new technology, which many security experts have deemed a privacy nightmare.

“Increasingly in our world, it gets harder and harder to know what is real,” Lorde told the audience. “You don’t know if someone is wearing sunglasses, or if they’re wearing those f–ed up, f–ing [AI glasses]. Can I just say, for the record, f— the glasses. Don’t get the glasses. Not sexy.”

Lorde has written before about throwing her phone into the ocean, but this was next level.

Lorde was possibly moved to comment on the latest trends in tech because Ray-Ban, a sponsor of the festival, partners with Meta to make AI glasses. Lorde also performed immediately before the singer Jennie, who is an ambassador for Ray-Ban x Meta’s smart glasses line.

Lorde isn’t alone in raising concerns. Smart glasses, which come with cameras and AI features, have been used as tools for harassment and extortion. Meta, the most popular smart glasses maker, has said it takes privacy seriously and builds in safeguards like a visible recording light, but the company is facing many investigations and lawsuits alleging privacy violations. One lawsuit alleges that Kenyan contract workers were made to watch graphic videos obtained with the glasses to help train Meta’s AI. (Meta hasn’t publicly detailed its response to that specific claim.)

None of this has stopped the product from strong sales. Ray-Ban Meta glasses have been a rare hit in the smart-glasses category, and Meta keeps expanding the lineup.

But hey, if privacy doesn’t make people think twice about the glasses, maybe vanity will. Lorde nails it pretty concisely with her declaration that they’re simply “not sexy.” The here and now, she added, now that “is sexy.”

When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.



See your kitchen or bathroom renovation in 3D with this $20 software


TL;DR: Plan and explore kitchen and bathroom renovations in 3D with a lifetime ArchiMaster license for $19.99 (reg. $59.99).


Credit: Richdale Ventures LLC

Renovation ideas can look great in your head but very different once the cabinets, countertops, and flooring are in the same room. ArchiMaster 3D Kitchen & Bath gives you a means to experiment before committing to a particular layout or wasting money on materials you might night need. A lifetime license for Windows is currently on sale for $19.99 (reg. $59.99), making it a savings of 67%.

This software allows homeowners and DIY renovators build kitchens and bathrooms in 3D without requiring a professional design experience. You can import photos of an existing kitchen or start a new layout from scratch, then test different configurations and see how the pieces work together.

Mashable Deals

By signing up, you agree to receive recurring automated SMS marketing messages from Mashable Deals at the number provided. Msg and data rates may apply. Up to 2 messages/day. Reply STOP to opt out, HELP for help. Consent is not a condition of purchase. See our Privacy Policy and Terms of Use.

There are more than 200 cabinet styles to choose from, plus a catalog of appliances and home electronics. A materials library lets you compare options for countertops, flooring, paint, stains, and fabrics, including granite, marble, slate, ceramic tile, and hardwood. You can preview the combination first instead of trying to imagine whether two finishes will work together or not.

Once your design starts taking shape, photorealistic 3D visualization lets you view it from different perspectives. Plus, there’s a VR mode for exploring your plans with compatible hardware, which is useful if staring at a floor plan doesn’t quite help you determine whether the finished space will feel cramped or not. The software works offline after installation, too, so an internet connection isn’t required every time inspiration strikes.

ArchiMaster is ideal for people planning their own kitchen or bathroom updates, whether that means testing a few aesthetic changes or working through a larger remodel. You can create unlimited designs, making it easier to compare ideas before settling on one, and have fun doing it!

The lifetime license includes a free upgrade to ArchiMaster 3D v3, (but future major releases starting with v4 will require a separate purchase). If you want to see your renovation ideas in 3D before making them real, ArchiMaster 3D Kitchen & Bath is currently available for $19.99 (reg. $59.99).

StackSocial prices subject to change.